What would I need to shave the rear of my truck?

bigred305 · 10-25-2002, 10:43 AM

I have several plans in mind for my truck and this is one of them I have been considering. What would be required as far as body work in order to have the whole tailgate/tail lights/roll pan shaved to look like one piece.

5-8 I am talking about like the concept picture of your truck in your sig. With the exception of the lights in the tailgate. I am considering putting them in the roll pan. Would this be a good idea since the lights would be so low? this is my daily driver so I want people to be able to see the lights good.

I know I would need
*Tail light Fillers
*kit to shave tail gate
* steel roll pan

Anything else? I am just running through some ideas in my head, so any comments or suggestions are welcome.

bigred305 · 10-25-2002, 10:57 AM

So if I can find a half ass competent body man, he should be able to figure it out? It doesn't seem like it would be too complicated.

I originally was just thinking about shaving the tailgate and molding in a roll pan, but this just seemed like a better option. and it would be better for shows.

What kind of rear light setups would you recommend?

bigred305 · 10-25-2002, 11:13 AM

Do you think that would be a better idea than having them in the roll pan?

I am done with a couple of other projects on my truck so I am looking for a new one...

I just got

*Optima Red Top Battery
*Red wire loom
*Rewired My system ( I put the good Sh!t this time)
*MSD Dist cap/ MSD 8.5 super conductor wires
*Cut the Vertical Bars out of my stock Grille(Just need to support it better now)
*Clear corners
*Painted some interior pieces
*A/F Guage
*U/D Crank Pulley

Probably some more small things, anyway just rambling about some of my progress, so everybody doesn't think I just talk about stuff and never get anything done...

Custom1 · 10-25-2002, 08:06 PM

Put a third brake light in the center of the gate and 2-4 led/s on the bottom. They are definately bright enough...

We have a few kinds (You know me...always pushing product!)
14" flush style, 22" flush, 5, 8, and 14" frenched.......

My feeling is that getting the light as far away from the center as possible helps keep the lines clean......

Anyway, a good body man should be able to do the insert for the gate and all the rest......but compare the pricing with the labor of ading a plate, and of a new skin...I guarantee that I would rather buy a skin and work it into a new gate rather than do the fitting, welding, grinding, and all the body work to a fabbed insert!

And, by the way, I will sell you the pan have waiting for 5-8........

....he can wait for another......( don't worry 5-8, I have more then one in stock)

Later,
Custom1

kevhill85 · 10-25-2002, 08:34 PM

here a pic of mine i just done

kevhill85 · 10-26-2002, 11:30 AM

see if it work now

kevhill85 · 10-26-2002, 11:54 AM

here another pic. i just took this one . i can get the sheet metel to do it like this for 50.00 + shipping. i make them at work

bigred305 · 10-26-2002, 01:29 PM

Quote:

Originally posted by Custom1
Put a third brake light in the center of the gate and 2-4 led/s on the bottom. They are definately bright enough...

We have a few kinds (You know me...always pushing product!)
14" flush style, 22" flush, 5, 8, and 14" frenched.......

My feeling is that getting the light as far away from the center as possible helps keep the lines clean......

Anyway, a good body man should be able to do the insert for the gate and all the rest......but compare the pricing with the labor of ading a plate, and of a new skin...I guarantee that I would rather buy a skin and work it into a new gate rather than do the fitting, welding, grinding, and all the body work to a fabbed insert!

And, by the way, I will sell you the pan have waiting for 5-8............he can wait for another......( don't worry 5-8, I have more then one in stock)

Later,
Custom1

Hey could you PM me on how much the pan, LED's, skin, and tail light fillers would be from you? I am in the process of looking around.

bigred305 · 10-26-2002, 01:34 PM

Quote:

Originally posted by kevhill85
here another pic. i just took this one . i can get the sheet metel to do it like this for 50.00 + shipping. i make them at work

Looks good man...

What kind of sheet metal do you use? What size sheets and how thick is it?

kevhill85 · 10-26-2002, 01:47 PM

i started with 8 by 4 sheet...16 gage.

kevhill85 · 10-26-2002, 01:50 PM

email me kevhill85@hotmail.com and i will give u the specs of the tail gate cover

10-25-2002, 10:43 AM	#1
bigred305 DSGB Status: Offline Join Date: Aug 2001 Member ID: 63 Pics: My Gallery Location: Alma, GA Age: 26 Posts: 2,554	What would I need to shave the rear of my truck? I have several plans in mind for my truck and this is one of them I have been considering. What would be required as far as body work in order to have the whole tailgate/tail lights/roll pan shaved to look like one piece. 5-8 I am talking about like the concept picture of your truck in your sig. With the exception of the lights in the tailgate. I am considering putting them in the roll pan. Would this be a good idea since the lights would be so low? this is my daily driver so I want people to be able to see the lights good. I know I would need Tail light Fillers kit to shave tail gate * steel roll pan Anything else? I am just running through some ideas in my head, so any comments or suggestions are welcome. Dan bigred305 87 C-10 TBI dropped 4/6 Too Many other mods to list Newest toy: 1995 Pontiac Trans Am Mods: A couple of toys here and there.... (Under the knife as we speak in search of better times....)

10-25-2002, 10:57 AM	#2
bigred305 DSGB Status: Offline Join Date: Aug 2001 Member ID: 63 Pics: My Gallery Location: Alma, GA Age: 26 Posts: 2,554	So if I can find a half ass competent body man, he should be able to figure it out? It doesn't seem like it would be too complicated. I originally was just thinking about shaving the tailgate and molding in a roll pan, but this just seemed like a better option. and it would be better for shows. What kind of rear light setups would you recommend? Dan bigred305 87 C-10 TBI dropped 4/6 Too Many other mods to list Newest toy: 1995 Pontiac Trans Am Mods: A couple of toys here and there.... (Under the knife as we speak in search of better times....)

10-25-2002, 11:13 AM	#3
bigred305 DSGB Status: Offline Join Date: Aug 2001 Member ID: 63 Pics: My Gallery Location: Alma, GA Age: 26 Posts: 2,554	Do you think that would be a better idea than having them in the roll pan? I am done with a couple of other projects on my truck so I am looking for a new one... I just got Optima Red Top Battery Red wire loom Rewired My system ( I put the good Sh!t this time) MSD Dist cap/ MSD 8.5 super conductor wires Cut the Vertical Bars out of my stock Grille(Just need to support it better now) Clear corners Painted some interior pieces A/F Guage *U/D Crank Pulley Probably some more small things, anyway just rambling about some of my progress, so everybody doesn't think I just talk about stuff and never get anything done... Dan bigred305 87 C-10 TBI dropped 4/6 Too Many other mods to list Newest toy: 1995 Pontiac Trans Am Mods: A couple of toys here and there.... (Under the knife as we speak in search of better times....)

10-25-2002, 08:06 PM	#4
Custom1 Registered User Status: Offline Join Date: Sep 2002 Member ID: 2817 Pics: My Gallery Location: Howe, TX Age: 37 Posts: 835	Put a third brake light in the center of the gate and 2-4 led/s on the bottom. They are definately bright enough... We have a few kinds (You know me...always pushing product!) 14" flush style, 22" flush, 5, 8, and 14" frenched....... My feeling is that getting the light as far away from the center as possible helps keep the lines clean...... Anyway, a good body man should be able to do the insert for the gate and all the rest......but compare the pricing with the labor of ading a plate, and of a new skin...I guarantee that I would rather buy a skin and work it into a new gate rather than do the fitting, welding, grinding, and all the body work to a fabbed insert! And, by the way, I will sell you the pan have waiting for 5-8............he can wait for another......( don't worry 5-8, I have more then one in stock) Later, Custom1 www.customclassic.com Steel Roll Pans, Custom LED's, Shaved Door Systems 800-365-6928

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Home Forum Gallery Rules Downloads Supporting Member Ebay on FSC!

10-25-2002, 08:34 PM	#5
kevhill85 Premium Member #107 Supporting Member Status: Offline Join Date: Apr 2002 Member ID: 1566 Pics: My Gallery Location: Crandall,Texas Age: 34 Posts: 170	here a pic of mine i just done

10-26-2002, 11:30 AM	#6
kevhill85 Premium Member #107 Supporting Member Status: Offline Join Date: Apr 2002 Member ID: 1566 Pics: My Gallery Location: Crandall,Texas Age: 34 Posts: 170	see if it work now

10-26-2002, 11:54 AM	#7
kevhill85 Premium Member #107 Supporting Member Status: Offline Join Date: Apr 2002 Member ID: 1566 Pics: My Gallery Location: Crandall,Texas Age: 34 Posts: 170	here another pic. i just took this one . i can get the sheet metel to do it like this for 50.00 + shipping. i make them at work

10-26-2002, 01:47 PM	#10
kevhill85 Premium Member #107 Supporting Member Status: Offline Join Date: Apr 2002 Member ID: 1566 Pics: My Gallery Location: Crandall,Texas Age: 34 Posts: 170	i started with 8 by 4 sheet...16 gage.

10-26-2002, 01:50 PM	#11
kevhill85 Premium Member #107 Supporting Member Status: Offline Join Date: Apr 2002 Member ID: 1566 Pics: My Gallery Location: Crandall,Texas Age: 34 Posts: 170	email me kevhill85@hotmail.com and i will give u the specs of the tail gate cover