cleaned up the whip the past two days.. lookn slick id say - Page 2

TSS · 04-09-2008, 05:49 PM

If bumper guards are as dicussed, they were really really cheap - like 20 - 30 bucks if I recall.

Bens95cobra8594 · 04-09-2008, 05:50 PM

Crazy clean. Looks great.

turbogunz · 04-09-2008, 06:48 PM

i like !!!! looks exactly like mine except mines an 04 but same 2 tone ecsb 4wd with alil crank and 285' nittos hahahaha cept i got 17's

very clean might i make a suggestion i took off my moldings and badges an stickers and it maed my truck look a million times better

hillnuttz11 · 04-09-2008, 10:50 PM

is their ne way u could post some pics.. i debadged my tailgate and have been thinking about my 1500 badges but i havnt done this yet not knowing what it may look like. and mouldings freak me out on pulling those off

m3gumby · 04-10-2008, 01:41 PM

Quote:

Originally Posted by TSS

If bumper guards are as dicussed, they were really really cheap - like 20 - 30 bucks if I recall.

In that case I'll trade you for shipping

poorboy01 · 04-11-2008, 01:03 PM

Looks great. I've got some 18" titan wheels I'm thinking about using with a 285LT tire. I'm running 285's now and just don't know if they clear or not. Mine are on 16" rims as we speak and I get just a little rub on the drivers side inner fender at full lock.

hillnuttz11 · 04-11-2008, 02:34 PM

yea these 18's with 285 rub a tiny bit in reverse turning without a lil cranking. i cranked maybe 2 turns and got an alignment and now its fine.. no rubbing at all

turbogunz · 04-11-2008, 03:55 PM

moldings are the easiest to get off!!!!! way easier then the badges thers only a tiny piece of tape on the top and bottom of the piece

REUBER · 04-11-2008, 08:44 PM

looks really good!

I wish it would stop snowing here I have some vehicles to wash

GarnerZ · 04-16-2008, 07:07 PM

i like the wheels i really do!!!awesome headlights too!

Norsican · 04-20-2008, 12:24 PM

Quote:

Originally Posted by hillnuttz11

anything trade wise .. throw something out thier . got the tails at jegs
http://www.jegs.com/i/Anzo/018/311010/10002/-1....

Is there any kind of Conversion needed for those tails or are they plug and play?

hillnuttz11 · 04-23-2008, 12:05 PM

yea they have a small transformer that you mount in the inner fender...real easy install

Norsican · 04-23-2008, 12:33 PM

Quote:

Originally Posted by hillnuttz11

yea they have a small transformer that you mount in the inner fender...real easy install

Funny how the Instructions on the site don't tell/show you that. =)

happen to have pics?

TSS · 04-24-2008, 08:13 AM

Those tails are great - would love to see a set on a NBS Tahoe, if they make them.

twobluechevy · 04-25-2008, 10:58 AM

I have prom tomm night so imma wash and wax ol blue tonight, only problem is it's callin for rain tomm =( O well, least she'll look good before the downpour.

00RCSB · 04-28-2008, 12:42 PM

very nice truck i would remove the gaurds if there were no holes and the molding just grab and pull

hick · 05-01-2008, 10:48 PM

was this your first time using a clay bar and doing your enitre truck?

my truck is in desprite need of a detail... specially before i decided whether ot not to take the truck in on paint warranty.... and jsut curious if its some thing i can do my self

m3gumby · 05-01-2008, 11:18 PM

Quote:

Originally Posted by hick

was this your first time using a clay bar and doing your enitre truck?

my truck is in desprite need of a detail... specially before i decided whether ot not to take the truck in on paint warranty.... and jsut curious if its some thing i can do my self

Claying isn't hard at all, just takes some time. Spray a thick detail film and glide the clay over the area.

GarnerZ · 05-07-2008, 04:26 PM

bringing back the old school bumper guard i had them on my 84 k10

thekl0wn · 05-08-2008, 08:28 AM

Truck looks great!

What wheels are those?

04-09-2008, 05:49 PM	#21
TSS 2007 Escalade AWD Status: Offline Join Date: Jan 2006 Member ID: 39675 Pics: My Gallery Location: MI Posts: 380	Re: cleaned up the whip the past two days.. lookn slick id say If bumper guards are as dicussed, they were really really cheap - like 20 - 30 bucks if I recall. SOLD: '01 Tahoe LT Autoride with '04 Silverado Z71 Rims; billet grill & bowtie; push bar; emblems/trim removed; tint; k&n; Superchips; CURRENT: 2007 Quicksilver Escalade 6.2 AWD; K&N; Diablo Predator Tune; E&G mesh fender vents; tint. Last edited by TSS : 04-09-2008 at 05:51 PM.

04-09-2008, 05:50 PM	#22
Bens95cobra8594 . Status: Offline Join Date: Jun 2007 Member ID: 70082 Pics: My Gallery Location: . Posts: 347	Re: cleaned up the whip the past two days.. lookn slick id say Crazy clean. Looks great.

04-09-2008, 06:48 PM	#23
turbogunz go hard or go home Status: Offline Join Date: Feb 2006 Member ID: 42266 Pics: My Gallery Location: red hook ny Age: 25 Posts: 376	Re: cleaned up the whip the past two days.. lookn slick id say i like !!!! looks exactly like mine except mines an 04 but same 2 tone ecsb 4wd with alil crank and 285' nittos hahahaha cept i got 17's very clean might i make a suggestion i took off my moldings and badges an stickers and it maed my truck look a million times better 2004 ecsb 4wd silverado mb motoring 17's super 40 flow aem style intake tbar crank 1.5in 285-70-17 nitto terra grapplers rough country nitro 9000 ext. length frt shox TO BE ORDERED CROSS DRILLED ROTORS TO MATCH MY HAWK PADS at all corners

04-09-2008, 10:50 PM	#24
hillnuttz11 Registered User Status: Offline Join Date: Feb 2008 Member ID: 83029 Pics: My Gallery Location: columbus Oh Posts: 112	Re: cleaned up the whip the past two days.. lookn slick id say is their ne way u could post some pics.. i debadged my tailgate and have been thinking about my 1500 badges but i havnt done this yet not knowing what it may look like. and mouldings freak me out on pulling those off HILLNUTTZ11

04-11-2008, 01:03 PM	#26
poorboy01 Registered User Status: Offline Join Date: Apr 2006 Member ID: 46405 Pics: My Gallery Location: Midwest. Posts: 46	Re: cleaned up the whip the past two days.. lookn slick id say Looks great. I've got some 18" titan wheels I'm thinking about using with a 285LT tire. I'm running 285's now and just don't know if they clear or not. Mine are on 16" rims as we speak and I get just a little rub on the drivers side inner fender at full lock.


Home Forum Gallery Rules Downloads Supporting Member Ebay on FSC!

04-11-2008, 02:34 PM	#27
hillnuttz11 Registered User Status: Offline Join Date: Feb 2008 Member ID: 83029 Pics: My Gallery Location: columbus Oh Posts: 112	Re: cleaned up the whip the past two days.. lookn slick id say yea these 18's with 285 rub a tiny bit in reverse turning without a lil cranking. i cranked maybe 2 turns and got an alignment and now its fine.. no rubbing at all HILLNUTTZ11

04-11-2008, 03:55 PM	#28
turbogunz go hard or go home Status: Offline Join Date: Feb 2006 Member ID: 42266 Pics: My Gallery Location: red hook ny Age: 25 Posts: 376	Re: cleaned up the whip the past two days.. lookn slick id say moldings are the easiest to get off!!!!! way easier then the badges thers only a tiny piece of tape on the top and bottom of the piece 2004 ecsb 4wd silverado mb motoring 17's super 40 flow aem style intake tbar crank 1.5in 285-70-17 nitto terra grapplers rough country nitro 9000 ext. length frt shox TO BE ORDERED CROSS DRILLED ROTORS TO MATCH MY HAWK PADS at all corners

04-11-2008, 08:44 PM	#29
REUBER US Army Recruiter Status: Offline Join Date: Mar 2008 Member ID: 86004 Pics: My Gallery Location: Sartell, MN Age: 28 Posts: 52	Re: cleaned up the whip the past two days.. lookn slick id say looks really good! I wish it would stop snowing here I have some vehicles to wash Traveling East, to that house, not made by hands, eternal in the heavens RIP Amos Bock Oct 23 2006 Baghdad, Iraq Hell of a Platoon Leader Even better friend See you in heaven brother

04-16-2008, 07:07 PM	#30
GarnerZ Strictly Business Status: Offline Join Date: Apr 2006 Member ID: 46123 Pics: My Gallery Location: Garner, NC Age: 19 Posts: 879	Re: cleaned up the whip the past two days.. lookn slick id say i like the wheels i really do!!!awesome headlights too! 04' RCSB Keys 315 BFG Flow 40's Blocks For Sale NC MEET COMING SOON

04-23-2008, 12:05 PM	#32
hillnuttz11 Registered User Status: Offline Join Date: Feb 2008 Member ID: 83029 Pics: My Gallery Location: columbus Oh Posts: 112	Re: cleaned up the whip the past two days.. lookn slick id say yea they have a small transformer that you mount in the inner fender...real easy install HILLNUTTZ11

04-24-2008, 08:13 AM	#34
TSS 2007 Escalade AWD Status: Offline Join Date: Jan 2006 Member ID: 39675 Pics: My Gallery Location: MI Posts: 380	Re: cleaned up the whip the past two days.. lookn slick id say Those tails are great - would love to see a set on a NBS Tahoe, if they make them. SOLD: '01 Tahoe LT Autoride with '04 Silverado Z71 Rims; billet grill & bowtie; push bar; emblems/trim removed; tint; k&n; Superchips; CURRENT: 2007 Quicksilver Escalade 6.2 AWD; K&N; Diablo Predator Tune; E&G mesh fender vents; tint.

04-25-2008, 10:58 AM	#35
twobluechevy Two Blue Chevy Status: Offline Join Date: Feb 2008 Member ID: 83296 Pics: My Gallery Location: Franklin, WV Age: 18 Posts: 60	Re: cleaned up the whip the past two days.. lookn slick id say I have prom tomm night so imma wash and wax ol blue tonight, only problem is it's callin for rain tomm =( O well, least she'll look good before the downpour. 1990 K1500 5.7L Auto, Eaton Locker Thanks 454ss for the sig! OBS Preservation Society

04-28-2008, 12:42 PM	#36
00RCSB 4.8 LITERS OF FURY Status: Offline Join Date: Apr 2008 Member ID: 87766 Pics: My Gallery Location: lebanon, mo Age: 23 Posts: 65	Re: cleaned up the whip the past two days.. lookn slick id say very nice truck i would remove the gaurds if there were no holes and the molding just grab and pull 00 CHEVY RCSB 4X4 4.8 5SPD. - BLACK 98 Z28 6SPD. - GREEN, MODS = ALOT, BUT NEVER ENOUGH

05-01-2008, 10:48 PM	#37
hick Registered User Status: Offline Join Date: Mar 2007 Member ID: 64756 Pics: My Gallery Location: Edmonton, Alberta Canada Posts: 195	Re: cleaned up the whip the past two days.. lookn slick id say was this your first time using a clay bar and doing your enitre truck? my truck is in desprite need of a detail... specially before i decided whether ot not to take the truck in on paint warranty.... and jsut curious if its some thing i can do my self

05-07-2008, 04:26 PM	#39
GarnerZ Strictly Business Status: Offline Join Date: Apr 2006 Member ID: 46123 Pics: My Gallery Location: Garner, NC Age: 19 Posts: 879	Re: cleaned up the whip the past two days.. lookn slick id say bringing back the old school bumper guard i had them on my 84 k10 04' RCSB Keys 315 BFG Flow 40's Blocks For Sale NC MEET COMING SOON

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode