hows this gun

[GMracer]

http://www.tcpglobal.com/spraygundep...G-653G-13/18CS
im lookin to start doin my own things, firts would be spraying my frame with chassis black, then primering my truck not sure if ill lay the paint yet.

also where is the best place to get supplies

[99gixxer]

doesnt look like a bad kit to start out with, you cant go wrong with devilbiss.

i started with a sharpe finex for about $150. did quite a few nice jobs with it. it only lasted a few years tho. now im using an iwata & a sata.

[Beyond Static©]

For spraying a frame black, and priming a truck, I'd go with the $50 gun from harbor freight. It will work plenty good for what you're trying to do, and if you figure out you don't like painting, you only lost $50. lol

[GMracer]

well i do want to paint paint later and practice so would it be ok beyondstatic? those are just the first things im doin... ive been readin the howtos here and really think i could get the hang of it

[cajundragger]

the $50 gun will also do base and clear so I agree with kyle...

[GM Muscle]

What do you have for an air compressor? The Finishline 3s are great entry level guns but they tend to be alittle more of an air hog than some others. Think they are rated at 13-15cfm at 23psi.

I have have acouple of GFG-670s and those are great with a smaller compressor (9cfm@30psi). Although 1 GFG-670 with acouple tips will cost as much as two Finish Lines. It's really nice having more than one gun when doing BC/CC.

Don't rule out Astro's guns either. Great entry level guns, I have acouple of those too and the newer ones are nice. Their EVOs are great LVLP guns.

Some link for you.
http://autobody101.com/forums/ (great forum)
http://www.spraygunworld.com/
http://www.autobodysupply.net/
http://www.tcpglobal.com/autobodydepot/
http://www.autopaintdirect.com/ (Valspar dealer)
http://www.smartshoppersinc.com/
http://www.evercoat.com/index.aspx (check out their Slick Sand or Feather Fill G2, awesome filler primer)

[GMracer]

60gallon compressor