Go Back   FSC Forum > General Discussion > Interior Tech
Register FAQ Calendar Mark Forums Read


Supporting Members don't see these! Click here.

Reply
 
LinkBack Thread Tools Display Modes
Old 03-02-2006, 12:13 AM   #1
Registered User
 
Join Date: Nov 2004
Location: Thunder Bay Ontario
Posts: 1,774
88-94 to 95-98 All Swap Info Compile

This is all the information that is available as of now compiled to make it easier for everyone to follow.

Included is:
Cluster Wiring
Power Door wiring MAN-POWER / POWER-POWER
Light Switch Wiring

To come:
A/C and Heater
Blower Motor
Power Mirrors
Power Seats
Overhead Console

This information is complements of Project 2005,SilveradoSS22s, and myself. I will update as more information arises and will make a complete '88-94 to 95-98 interior swap tutorial when the time comes including the power seat swap complete with pictures and diagrams.

Any corrections of suggestions please PM thanks.

ADDED: 88-94 to 95-98 Power locks and Doors
Manual to Power
Power to Power

-------------------------------------------------------------------------
-------------------------------------------------------------------------
Gauge Cluster Swap for Dash Swap

88-94 Function 95-98


A Alternater - 19
W Gas 16
R Temp 13
P Oil 15
T Tach 6
S Speed 14
N,G,Q Ground 31,34,4
F,O,U Fuse 22,7
B Anti Lock 27
C Check Engine 23
E Park Brake 28
J Low Coolant ??
L Left Turn 3
M High Beam 5
V Illumination 29
X Seatbelt 30
Z Right Turn 32


Light Control Swap for Dash Swap

88-94 95-98

Red \\ Red
White \\ White
Green \\ Green
Brown \\ Brown
Orange \\ Orange
Black \\ Black
Yellow \\ Yellow


Door Panel Swap 88-94 With Power

88-94 \\ 95-98

3 PIN HARNESS
Tan \\ Tan
Dark blue w/white stripe \\ Light blue
Red \\ Yellow


6 PIN HARNESS
Light blue \\ Light blue
Black w/red stripe \\ White
Orange w/black stripe \\ Orange
Grey \\ Grey
Tan \\ Tan
Black \\ Black

Door Panel Swap 88-94 Without Power

95-98

DRIVER SIDE \\ PASSEGNER SIDE \\ TO TRUCK HARNESS ( Under dash )

3 PIN HARNESS ( WINDOWS )
Tan \\ Tan
Light blue \\ Light Blue
Yellow \\ Yellow \\ POWER +12V Ignition (PINK)


6 PIN HARNESS ( LOCKS )
Light blue \\ Light Blue \\ POWER +12V Constant (RED/ORANGE)
White \\ White
Orange \\ Orange
Grey \\ Grey
Tan \\ Tan
Black \\ Black


This is still underway.

95-98 Steering Column Wiring Pins:

A1 - TCC/Stop Lamp Switch Output
A2 - Fused Ignition Output
A3 - GND
A5 - Right Turn Output
A6 - Left Turn Output
A11 - Horn Output
A12 - Cruise Control ON Switch Output
A13 - Fused Ignition Feed
A14 - Cruise Control Set Coast Switch Signal
A15 - Cruise Control Resume / Accel Switch Signal
A16 - GND
A17 - Brake Transmission Shift Interlock Solenoid Feed

B2 - GND
B3 - Key Reminder Feed
B4 - Key Reminder Out


C1 - Ignition Switch Output - OFF,RUN, CRANK
C2 - GND
C4 - Ignition Feed
C5 - Ignition Feed

D1 - Ignition Out - CRANK
D2 - Battery Feed
D5 - Battery Feed
D6 - Ignition Switch Output - ACCESSORY

E1 - Turn / Hazard Feed
E2 - Stop Lamp Feed
E3 - Wiper Motor High
E4 - Accessory Feed
E5 - Wiper Motor Pulse Wiper Signal
E6 - Right Stop / Turn Feed
E7 - Left Stop / Turn Feed
E8 - Battery Feed
E9 - Turn / Hazard Flasher Output
E11 - High Beam Feed
E12 - DRL Relay Output (Low Beam )
E13 - Headlamp Out


Add notes:

All parts from 88-98 are interchangable with one and other. This means that all parts in the 88-94 style interior WILL fit into the 95-98 interior and visa-versa.

Tech notes:

98 dash install: All three bolts on top and the top on bottom line up perfect. The a-pillars and kick panels also snap right into place.
Attached Files
File Type: txt 88-94to95-98.txt (1.2 KB, 1605 views)
__________________


88 GMC RCLB Z71 3/4 ton

6" ProComp 3" BL
35x15.50x15 SX's

Last edited by MStefak; 01-24-2008 at 06:19 PM.
MStefak is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 12:52 AM   #2
formerly known as project2005
 
Join Date: Jan 2004
Location: usa
Posts: 3,119
Re: 88-94 to 95-98 All Swap Info Compile

sweet deal! now this one needs to be a sticky, since these are proven diagrams. glad to help out!
__________________
Otto is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:02 AM   #3
Registered User
 
Join Date: Nov 2004
Location: Thunder Bay Ontario
Posts: 1,774
Re: 88-94 to 95-98 All Swap Info Compile

Figured it was a good idea. I know the door panels work because I've done it and I figured you, Project 2005, seems to know what your doing and it should be correct.

Like I said as more info and ANYTHING as far as the difference in interiors arises I will post. Also stock seat mount brackets and the different holes you have to drill will be posted soon as well, dimensions and all.
__________________


88 GMC RCLB Z71 3/4 ton

6" ProComp 3" BL
35x15.50x15 SX's
MStefak is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:47 AM   #4
Registered User
 
siveradoss22s's Avatar
 
Join Date: Feb 2005
Location: Mission, Texas
Posts: 308
Re: 88-94 to 95-98 All Swap Info Compile

Ok Im looking at the the door panel swap with power. I kind of understand it now. I had posted earlier that I was confused, but it is starting to make sense. But, I still dont see if both side are the same.. MAybe when I have the harnesses in front of me I will be able to tell. Anybody have any wiring drawing or pics to make my life easier..would really appreciate it..
siveradoss22s is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 12:00 PM   #5
House on the HILL!
 
CKTA's Avatar
 
Join Date: Aug 2001
Location: New Jersey
Age: 34
Posts: 52,297
Re: 88-94 to 95-98 All Swap Info Compile

Quote:
Originally Posted by Project 2005
sweet deal! now this one needs to be a sticky, since these are proven diagrams. glad to help out!
Stuck!
__________________
2010 Carlisle All Truck Nats info..
http://www.fullsizechevy.com/forums/...aug-6-8th.html

CKTA is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 06:45 PM   #6
Registered User
 
Join Date: Nov 2004
Location: Thunder Bay Ontario
Posts: 1,774
Re: 88-94 to 95-98 All Swap Info Compile

Pimp my first sticky! haha

I'll try and get this info so you dont have to always download the new file.
__________________


88 GMC RCLB Z71 3/4 ton

6" ProComp 3" BL
35x15.50x15 SX's
MStefak is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 06:52 PM   #7
Registered User
 
LS6TT's Avatar
 
Join Date: Oct 2003
Location: Fort Worth, TX
Age: 26
Posts: 1,491
Re: 88-94 to 95-98 All Swap Info Compile

Best post ever right there!!! Good job!
LS6TT is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 07:11 PM   #8
Registered User
 
Join Date: Nov 2004
Location: Thunder Bay Ontario
Posts: 1,774
Re: 88-94 to 95-98 All Swap Info Compile

I cant take full credit for this information as of now this would not have been possible with the help of Project 2005 and SilveradoSS22s.
__________________


88 GMC RCLB Z71 3/4 ton

6" ProComp 3" BL
35x15.50x15 SX's
MStefak is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 07:16 PM   #9
Registered User
 
Join Date: Nov 2004
Location: Thunder Bay Ontario
Posts: 1,774
Re: 88-94 to 95-98 All Swap Info Compile

Soon I will be offering ' Quick Wiring Harness Adapters '.

What this will be are two pigtails one 88-94 and one 95-98 with 3-4 inches of wire inbetween. The harness will have the appropriate wires going to the appropriate pigtail number/letter. They will be available for Door panel swaps WITH power , Cluster swaps, and A/C heater controls which will include proper relays in place.

This will allow for a quick safe way to adapt one style to the other!
__________________


88 GMC RCLB Z71 3/4 ton

6" ProComp 3" BL
35x15.50x15 SX's
MStefak is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 07:44 PM   #10
Registered User
 
siveradoss22s's Avatar
 
Join Date: Feb 2005
Location: Mission, Texas
Posts: 308
Re: 88-94 to 95-98 All Swap Info Compile

Thats a great idea.. MONEY MAKING IDEA.. some people who aren't to familiar with electric stuff, would rather just get a plug nad play kit to convert..

Good luck man..
siveradoss22s is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 07:47 PM   #11
Registered User
 
Join Date: Nov 2004
Location: Thunder Bay Ontario
Posts: 1,774
Re: 88-94 to 95-98 All Swap Info Compile

Thats what I was thinking. They should be farly easy to make.
__________________


88 GMC RCLB Z71 3/4 ton

6" ProComp 3" BL
35x15.50x15 SX's
MStefak is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 10:16 PM   #12
Registered User
 
Join Date: Nov 2004
Location: Thunder Bay Ontario
Posts: 1,774
Re: 88-94 to 95-98 All Swap Info Compile

Before the question gets asked I'll answer it.

The letters are like PIN Numbers. They specify what wire it is. If you look at the pigtails you will see these letters.
__________________


88 GMC RCLB Z71 3/4 ton

6" ProComp 3" BL
35x15.50x15 SX's
MStefak is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 10:53 PM   #13
formerly known as project2005
 
Join Date: Jan 2004
Location: usa
Posts: 3,119
Re: 88-94 to 95-98 All Swap Info Compile

the newer panels dont work like ours do, but you can make them so that they do, or so i hope.
__________________

Last edited by Otto; 07-22-2006 at 11:14 AM.
Otto is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 10:53 PM   #14
formerly known as project2005
 
Join Date: Jan 2004
Location: usa
Posts: 3,119
Re: 88-94 to 95-98 All Swap Info Compile

ok, someone try that out and let me know how it works.
__________________
Otto is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:00 PM   #15
Registered User
 
siveradoss22s's Avatar
 
Join Date: Feb 2005
Location: Mission, Texas
Posts: 308
Re: 88-94 to 95-98 All Swap Info Compile

Quote:
Originally Posted by Project 2005
ok, heres the list for the door panels. everything is listed like this:

93 harness----97 harness

driver side switch conversion chart.

C----------------E (DRIVER WINDOW DOWN)
D--------------A(DRIVER WINDOW UP)
-

N--------------D(PASSENGER WINDOW DOWN)
P--------------B(PASSENGER WINDOW UP)

B,E,M,R?--------------C(GROUNDS)
A,L---------------L(CONVIENCE CENTER)
NONE-----------J(LIGHTS)

PASSENGER SWITCH

E----L
B----J
O----K
D---G

THIS IS KIDNA HARD TO WRITE DOWN, ILL BE WORKING ON IT A LIL MORE IN A WAY TO UNDERSTAND IT. AFTER THAT ILL WRITE DOWN THE LOCKS/UNLOCKS
this makes more sense to me, since I couldnt locate the matching colors.. Ill try this tomorrow.
Also, what is meant by convenience center?
Ill try this tomorrow afternoon..
siveradoss22s is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:02 PM   #16
formerly known as project2005
 
Join Date: Jan 2004
Location: usa
Posts: 3,119
Re: 88-94 to 95-98 All Swap Info Compile

i have no clue in hell. jsut connect them i guess, since they come up on both iagrams
__________________
Otto is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:12 PM   #17
Registered User
 
chevyz71man's Avatar
 
Join Date: Oct 2004
Location: Lino Lakes, MN
Age: 22
Posts: 1,108
Re: 88-94 to 95-98 All Swap Info Compile

I have pictures of the door locks right now, I am uploading them. They have pics of wht wires needed to be added to the 95+ switches and how to make it work. There is no way to make it work without adding wires unless you run 4 relays for the lock motors. Trust me the 94s use whats called reverse polarity locks and 95 ups dont.
__________________
1994 Chevy k1500 14bff and dana44hp running gear being installed. 7" lift, satin black h2 wheels, 36" IROKS!
Built 383 and built 4l60E
98 Interior
chevyz71man is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:14 PM   #18
formerly known as project2005
 
Join Date: Jan 2004
Location: usa
Posts: 3,119
Re: 88-94 to 95-98 All Swap Info Compile

yea, i was noticing that on the swap. i was just trying to bi pass how they hooked up... im interested to see the pics
__________________
Otto is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:15 PM   #19
Registered User
 
siveradoss22s's Avatar
 
Join Date: Feb 2005
Location: Mission, Texas
Posts: 308
Re: 88-94 to 95-98 All Swap Info Compile

Quote:
Originally Posted by chevyz71man
I have pictures of the door locks right now, I am uploading them. They have pics of wht wires needed to be added to the 95+ switches and how to make it work. There is no way to make it work without adding wires unless you run 4 relays for the lock motors. Trust me the 94s use whats called reverse polarity locks and 95 ups dont.

There you are man.. We have been looking for you! LOL Yeah pics would be really helpful.. How anout some pics of your progress.. I heard you got you installed an overhead console.
siveradoss22s is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 03-02-2006, 11:18 PM   #20
Registered User
 
siveradoss22s's Avatar
 
Join Date: Feb 2005
Location: Mission, Texas
Posts: 308
Re: 88-94 to 95-98 All Swap Info Compile

1994 Chevy K1500 3" Body lift, 33" BFG KOs
383 stroker Keith Black pistons, 2.02 1.60 valves, Holley 670 TB, Bored blended and port match intake, Walbro 190l pump, Edelbrock shorty headers, MSD Pro billet Dist, MSD wires, RV cam, Roller Rockers and 6 quart oil pan.

Looks like you are running some high performance here.. Just wondering, what type of cluster will you be using?
siveradoss22s is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






Advertise with FSC



FSC Supporters get goodies!.

We've done the searching for you.

Buy Chevy Parts & Accessories

Need products for your FSC? Check out your options at the links below:

     Save up to 45% off list on K&N Cold Air Intake Kits & get Free Shipping! *restrictions apply
     Save up to 64% off list & get Free Shipping on Truck Lift Kits - in stock now!
     NEW! MBRP Smokers Diesel Exhaust Stacks. Everything you need to plant dual smoke stacks in your truck bed. From $643.95 + Free Shipping.
     Silverado Accessories - Hottest Products!


All times are GMT -6. The time now is 06:41 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.0