Post Your Setup - Page 11

goodmouse02 · 01-09-2007, 07:14 PM

I'll get some more up pretty soon. lol, I was expectin some trash talk cuz of the 22's!

KickAss89chev · 01-13-2007, 05:45 PM

body lifted 3 inches on 285's

xxhybridxx · 01-18-2007, 09:10 AM

+sig, and added nerf bars, everything else stock for now ;)

xvr · 01-23-2007, 12:14 AM

2005 Chevy Silverado
Crew Cab Z71 Offroad 1/2 ton
4wd
37x13.50x17 Toyo M/T
17x10 Weld Sandstorms
7-9" Cognito Motorsport
Torsion bar Rating or Code:
Torsion bars cranked 2"
ORU leveling keys
3" blocks
7" Betts springs
3" Body Lift
Fender Height Measurements 52 1/2 front, 52 back
No trimming of anything

chevbowtie22 · 01-23-2007, 01:19 PM

^^ Nice looking truck!! Very clean. How do you like you betts rear springs?

RWSZ71 · 01-23-2007, 03:55 PM

95 Z71
Stock suspension
TB cranked all the way.
315/75/16 Goodyears

stevefendt11 · 01-26-2007, 01:21 PM

-2003
-GMC
-Sierra 2500HD
-4x4
-285/75/16
-16" Mickey Thompson Classic locks
-Rancho 4" suspension lift
-No cranking or messing with the tortion bars or keys
-There is 2" blocks for the rear that came with the lift
-I also had a leaf added so I could get my rake right
-No body lift
-No aftermarket bumpers
-I had to trim a little off of the front bumper on the bottom corner when I got my 16x8 wheels put on...other than that...no
-Fender Height: about 45" Front and Rear

DblNutzSierra4x4 · 01-26-2007, 02:00 PM

Year: 2000
Make: GMC
Model: Sierra
2wd or 4wd: 4x4
Tire Size: 315 75 16 BFG Mudders
Wheel Size: 16x10 Eagle Alloy's
Lift Kit: 6in ProComp
Lift Blocks: Yes
Fender Height Measurements: About 45in from the ground
Any fender or body trimming needed? Yes air dam and wheel well cover.
K&N cold air
Flowmaster Dual Exhaust

chew13 · 01-30-2007, 02:29 PM

Year: 1979
Make: Chevrolet
Model:Blazer Cheyenne
Full-time 4wd (NP203)
Tire Size: 33x12.5x15
Wheel Size: 15x8
Lift kit size and Brand if not stock: Not too sure if it is stock or not. All springs will replaced soon enough.
Lift Blocks: Never
Add-A-Leafs: Maybe. Was done before i got it

Body Lift: Nope.
Aftermarket Bumpers: Rear bumper is thick diamond plate. Temporary. Front and back will be customer made in a few months.
Fender Height Measurements: Never checked.
Any fender or body trimming needed?: Nope.

Just finishing an engine swap to a modified 350.

rob · 01-30-2007, 08:42 PM

Quote:

Originally Posted by goodmouse02

I'll get some more up pretty soon. lol, I was expectin some trash talk cuz of the 22's!

can't lose on 22's!!! lol... had to say it.

90% of the people here probably didn't have that style truck in mind when it came to a lifted ride.

personally, I think it's awesome, I love fully custom trucks, and have always wanted to try fiberglass, but never had the guts to do it to any of my rides.

sweet truck man!

sktw8 · 02-08-2007, 08:05 AM

Year: 2000
Make: Chevy
Model: 1500 Z71
2wd or 4wd: 4wd
Tire Size: 315-75 R16 Cooper STT's
Wheel Size:16 Black Rock Crawler
Lift kit size and Brand if not stock: stock
Torsion bar Rating or Code: Stock 1500
Torsion bars cranked or not and if so how much: Maxed out
Torsion bar keys if any: none
Lift Blocks?: 2" stock
Add-A-Leafs?: no
Body Lift?: posibly 1" in the near future
Aftermarket Bumpers?: not yet
Fender Height Measurements: about 40" all around
Any fender or body trimming needed? (If so where?): Trimmed Air dam. And most of the inner fender

Jack

dsponder · 02-08-2007, 05:26 PM

Year 1994
Make chevy k1500
Model
2wd or 4wd 4wd
Tire Size 295/75r16 General Grabber AT2's
Wheel Size 16x8
Lift kit size and Brand if not stock
Torsion bar Rating or Code:???
Torsion bars cranked or not and if so how much. 2"
Torsion bar keys if any none
Lift Blocks? 2"
Add-A-Leafs? none
Body Lift? none
Aftermarket Bumpers? none
Fender Height Measurements 39" front 40" rear
Any fender or body trimming needed? (If so where?) none

Red97 · 02-15-2007, 08:36 AM

Year: 1997
Make: chevy
Model: K1500
2WD/4x4: 4X4
Tire: 32-11.50-15 bald BFG MT for now soon to be 315/75/16 toyo A/T
Wheel: 15x8 black steel for now 16x8 Classic II coming soon
Lift: fabtech 6in
Torsion bar: stock
Cranked: 1.5"
Keys: stock
Lift blocks: 4"
Add A Leaf: 2"
Body lift: None
Aftermarket bumper: None
Fender Measurements: 44"Front 42.75" 46.5" 44" with 35" tires and wheels
Trimming: removed front plastic valence. No metal trimming so far

oilfieldtrash06 · 02-16-2007, 08:27 PM

Here is my junk slung truck. it still runs. got sick of breaking front end parts and its gonna stay 2x4 for a while now. mods are listed in signature. it now has fender flares and yes i done ****loads of trimming. the bedsides have been cut since these photos and also lots of trimming on the front inner corners.

oilfieldtrash06 · 02-16-2007, 08:29 PM

oilfieldtrash06 · 02-16-2007, 08:31 PM

oilfieldtrash06 · 02-16-2007, 08:35 PM

KickAss89chev · 02-16-2007, 09:08 PM

Quote:

Originally Posted by oilfieldtrash06

now thats what i call an aftermarket bumper, lol

silverado_nolan · 02-17-2007, 11:27 PM

Quote:

Originally Posted by KickAss89chev

now thats what i call an aftermarket bumper, lol

more like after accident.... damn man, you wheel that thing hard, I hear ya on the stayin 2X4 thing, I did that a while with my transfer case but got a new one so Im good to go again

BigBlue02HD · 02-18-2007, 12:39 PM

UPDATE:

Year: 2002
Make: Chevrolet
Model: Silverado 2500HD
2WD/4x4: 4X4
Tire: 37/13.50/17 Toyo M/T
Wheel: 17x9 Polished Eagle 187's (5"B.S)
Lift: 7-9" Cognito (Bilstein 5100's)
Torsion bar: Stock
Cranked: N/A
Keys: Green Keys (completely decranked)
Lift blocks: 5.5" Cognito
Add A Leaf: N/A
Body lift: 3" Perf. Accessories
Aftermarket bumper: None
Fender Measurements: 51.5" all around
Trimming: Corner of lower valance (from old setup)

Year: 1994
Make: Chevrolet
Model: 2dr. Blazer
2WD/4x4: 4X4
Tire: 31/10.50/15 BFG A/T's
Wheel: 15x8 Polished Eagle 186's
Lift: N/A
Torsion bar: Stock
Cranked: 1"
Keys: Stock
Lift blocks: 2"
Add A Leaf: N/A
Body lift: N/A
Aftermarket bumper: None
Fender Measurements: 37.5" all around
Trimming: None

01-09-2007, 07:14 PM	#201
goodmouse02 they call me whitey Status: Offline Join Date: Dec 2002 Member ID: 3872 Pics: My Gallery Location: orlando FL Age: 24 Posts: 204	Re: Post Your Setup I'll get some more up pretty soon. lol, I was expectin some trash talk cuz of the 22's! '90 Z71 lifted on 22's

01-13-2007, 05:45 PM	#202
KickAss89chev Registered Woman Pleaser Status: Offline Join Date: Mar 2006 Member ID: 43619 Pics: My Gallery Location: Lakefield, MN Posts: 1,434	Re: Post Your Setup body lifted 3 inches on 285's 1981 Monte Carlo, dual pipes,FOR SALE 1985 Monte Carlo. Dual exhuast on a mild built 350. T Tops

01-18-2007, 09:10 AM	#203
xxhybridxx Registered User Status: Offline Join Date: Jan 2007 Member ID: 61244 Pics: My Gallery Location: baytown Posts: 4	Re: Post Your Setup +sig, and added nerf bars, everything else stock for now ;) 04 GMC Sierra ext. SLT- Z71- AirRaid TBS- K&N Drop in

01-23-2007, 12:14 AM	#204
xvr Registered User Status: Offline Join Date: Jan 2006 Member ID: 40891 Pics: My Gallery Location: Hawaii Posts: 111	Re: Post Your Setup 2005 Chevy Silverado Crew Cab Z71 Offroad 1/2 ton 4wd 37x13.50x17 Toyo M/T 17x10 Weld Sandstorms 7-9" Cognito Motorsport Torsion bar Rating or Code: Torsion bars cranked 2" ORU leveling keys 3" blocks 7" Betts springs 3" Body Lift Fender Height Measurements 52 1/2 front, 52 back No trimming of anything

01-23-2007, 01:19 PM	#205
chevbowtie22 Registered User Status: Offline Join Date: May 2006 Member ID: 47975 Pics: My Gallery Location: Minnesota Posts: 501	Re: Post Your Setup ^^ Nice looking truck!! Very clean. How do you like you betts rear springs? Sig under construction . . . '04 Blue Silverado lifted SOLD '08 Black Denali AWD EFI Live tuned special thanks to Justin @ Black Bear Performance More to come . . .


Home Forum Gallery Rules Downloads Supporting Member Ebay on FSC!

01-23-2007, 03:55 PM	#206
RWSZ71 Registered User Status: Offline Join Date: Jan 2007 Member ID: 62203 Pics: My Gallery Location: Iowa Posts: 18	Re: Post Your Setup 95 Z71 Stock suspension TB cranked all the way. 315/75/16 Goodyears 1987 Oldsmobile Cutlass Supreme 1995 Silverado Z71 RCSB 350 TBI, not stock. 2002 Silverado 2500HD 6.0, Dynomax Ultra Flow Dual 3" Exhaust, Fram Air Hog Filter. 2007 Kawasaki ZZR600

01-26-2007, 01:21 PM	#207
stevefendt11 GOT SAND? Status: Offline Join Date: Jan 2007 Member ID: 62357 Pics: My Gallery Location: Dexter, MI Posts: 118	Re: Post Your Setup -2003 -GMC -Sierra 2500HD -4x4 -285/75/16 -16" Mickey Thompson Classic locks -Rancho 4" suspension lift -No cranking or messing with the tortion bars or keys -There is 2" blocks for the rear that came with the lift -I also had a leaf added so I could get my rake right -No body lift -No aftermarket bumpers -I had to trim a little off of the front bumper on the bottom corner when I got my 16x8 wheels put on...other than that...no -Fender Height: about 45" Front and Rear 4" Rancho Lift, SLP: Programmer, Headers, K&N FIPK, Dual custom chambered mufflers MAFS, M/T Classic Lock's, 315/75/16 Mickey Thompson MTZ's, 4.10's, Lim. slip Rear, 791XV Last edited by stevefendt11 : 03-16-2007 at 09:57 PM.

01-26-2007, 02:00 PM	#208
DblNutzSierra4x4 Steel on target, over Status: Offline Join Date: Aug 2001 Member ID: 58 Pics: My Gallery Location: Ft. Worth,Texas Age: 36 Posts: 208	Re: Post Your Setup Year: 2000 Make: GMC Model: Sierra 2wd or 4wd: 4x4 Tire Size: 315 75 16 BFG Mudders Wheel Size: 16x10 Eagle Alloy's Lift Kit: 6in ProComp Lift Blocks: Yes Fender Height Measurements: About 45in from the ground Any fender or body trimming needed? Yes air dam and wheel well cover. K&N cold air Flowmaster Dual Exhaust I proudly serve my country in a noble cause. I will never falter. I will make personal sacrifices to keep my nation free. Brave Marines of the past are proud of me. I AM ONE OF THE FEW, THE PROUD. I AM A MARINE! Semper Fi Last edited by DblNutzSierra4x4 : 01-26-2007 at 02:04 PM.

01-30-2007, 02:29 PM	#209
chew13 Registered User Status: Offline Join Date: Jan 2007 Member ID: 62619 Pics: My Gallery Location: Kitchener, Ontario, Canada Posts: 2	Re: Post Your Setup Year: 1979 Make: Chevrolet Model:Blazer Cheyenne Full-time 4wd (NP203) Tire Size: 33x12.5x15 Wheel Size: 15x8 Lift kit size and Brand if not stock: Not too sure if it is stock or not. All springs will replaced soon enough. Lift Blocks: Never Add-A-Leafs: Maybe. Was done before i got it Body Lift: Nope. Aftermarket Bumpers: Rear bumper is thick diamond plate. Temporary. Front and back will be customer made in a few months. Fender Height Measurements: Never checked. Any fender or body trimming needed?: Nope. Just finishing an engine swap to a modified 350.

02-08-2007, 08:05 AM	#211
sktw8 Registered User Status: Offline Join Date: Jul 2006 Member ID: 52193 Pics: My Gallery Location: Alabama Posts: 303	Re: Post Your Setup Year: 2000 Make: Chevy Model: 1500 Z71 2wd or 4wd: 4wd Tire Size: 315-75 R16 Cooper STT's Wheel Size:16 Black Rock Crawler Lift kit size and Brand if not stock: stock Torsion bar Rating or Code: Stock 1500 Torsion bars cranked or not and if so how much: Maxed out Torsion bar keys if any: none Lift Blocks?: 2" stock Add-A-Leafs?: no Body Lift?: posibly 1" in the near future Aftermarket Bumpers?: not yet Fender Height Measurements: about 40" all around Any fender or body trimming needed? (If so where?): Trimmed Air dam. And most of the inner fender Jack 2000 Z71 5.3L Painted Bowtie, Straight Pipes with 5" tips, two Kicker CompVR subs with a Profile AP1200 Amp. Exhaust Sound Clip http://fullsizechevy.com/forums/show...90#post2447390

02-08-2007, 05:26 PM	#212
dsponder like a rock Status: Offline Join Date: Nov 2006 Member ID: 58382 Pics: My Gallery Location: illinois Posts: 1,111	Re: Post Your Setup Year 1994 Make chevy k1500 Model 2wd or 4wd 4wd Tire Size 295/75r16 General Grabber AT2's Wheel Size 16x8 Lift kit size and Brand if not stock Torsion bar Rating or Code:??? Torsion bars cranked or not and if so how much. 2" Torsion bar keys if any none Lift Blocks? 2" Add-A-Leafs? none Body Lift? none Aftermarket Bumpers? none Fender Height Measurements 39" front 40" rear Any fender or body trimming needed? (If so where?) none Last edited by dsponder : 02-26-2007 at 09:47 PM.

02-15-2007, 08:36 AM	#213
Red97 Registered User Status: Offline Join Date: Feb 2007 Member ID: 63621 Pics: My Gallery Location: Michigan Age: 17 Posts: 24	Re: Post Your Setup Year: 1997 Make: chevy Model: K1500 2WD/4x4: 4X4 Tire: 32-11.50-15 bald BFG MT for now soon to be 315/75/16 toyo A/T Wheel: 15x8 black steel for now 16x8 Classic II coming soon Lift: fabtech 6in Torsion bar: stock Cranked: 1.5" Keys: stock Lift blocks: 4" Add A Leaf: 2" Body lift: None Aftermarket bumper: None Fender Measurements: 44"Front 42.75" 46.5" 44" with 35" tires and wheels Trimming: removed front plastic valence. No metal trimming so far Last edited by Red97 : 03-03-2007 at 08:32 PM.

02-16-2007, 08:27 PM	#214
oilfieldtrash06 oilfield_trash Status: Offline Join Date: Nov 2006 Member ID: 57723 Pics: My Gallery Location: Olla, La. Age: 22 Posts: 20	Re: Post Your Setup Here is my junk slung truck. it still runs. got sick of breaking front end parts and its gonna stay 2x4 for a while now. mods are listed in signature. it now has fender flares and yes i done ***loads of trimming. the bedsides have been cut since these photos and also lots of trimming on the front inner corners. 03 GMC Z71, 6" Rough Country,3" body,Add a leaf, 37/13.50/18 Nitto Mud Grappler,18" Helo Maxx 6 wheels,Superchips,K&N cold air,Straights,05 chevy taillights,Billet insert,bailin wire and hose clamps everywhere IF IT WONT MAKE IT, BREAK IT!!!! Last edited by oilfieldtrash06 : 02-16-2007 at 08:34 PM.*

02-16-2007, 08:29 PM	#215
oilfieldtrash06 oilfield_trash Status: Offline Join Date: Nov 2006 Member ID: 57723 Pics: My Gallery Location: Olla, La. Age: 22 Posts: 20	Re: Post Your Setup 03 GMC Z71, 6" Rough Country,3" body,Add a leaf, 37/13.50/18 Nitto Mud Grappler,18" Helo Maxx 6 wheels,Superchips,K&N cold air,Straights,05 chevy taillights,Billet insert,bailin wire and hose clamps everywhere IF IT WONT MAKE IT, BREAK IT!!!!

02-16-2007, 08:31 PM	#216
oilfieldtrash06 oilfield_trash Status: Offline Join Date: Nov 2006 Member ID: 57723 Pics: My Gallery Location: Olla, La. Age: 22 Posts: 20	Re: Post Your Setup 03 GMC Z71, 6" Rough Country,3" body,Add a leaf, 37/13.50/18 Nitto Mud Grappler,18" Helo Maxx 6 wheels,Superchips,K&N cold air,Straights,05 chevy taillights,Billet insert,bailin wire and hose clamps everywhere IF IT WONT MAKE IT, BREAK IT!!!!

02-16-2007, 08:35 PM	#217
oilfieldtrash06 oilfield_trash Status: Offline Join Date: Nov 2006 Member ID: 57723 Pics: My Gallery Location: Olla, La. Age: 22 Posts: 20	Re: Post Your Setup 03 GMC Z71, 6" Rough Country,3" body,Add a leaf, 37/13.50/18 Nitto Mud Grappler,18" Helo Maxx 6 wheels,Superchips,K&N cold air,Straights,05 chevy taillights,Billet insert,bailin wire and hose clamps everywhere IF IT WONT MAKE IT, BREAK IT!!!!

02-18-2007, 12:39 PM	#220
BigBlue02HD Team Fuel Motorsports Status: Offline Join Date: Jul 2004 Member ID: 16738 Pics: My Gallery Location: Landenberg, PA Age: 27 Posts: 855	Re: Post Your Setup UPDATE: Year: 2002 Make: Chevrolet Model: Silverado 2500HD 2WD/4x4: 4X4 Tire: 37/13.50/17 Toyo M/T Wheel: 17x9 Polished Eagle 187's (5"B.S) Lift: 7-9" Cognito (Bilstein 5100's) Torsion bar: Stock Cranked: N/A Keys: Green Keys (completely decranked) Lift blocks: 5.5" Cognito Add A Leaf: N/A Body lift: 3" Perf. Accessories Aftermarket bumper: None Fender Measurements: 51.5" all around Trimming: Corner of lower valance (from old setup) Year: 1994 Make: Chevrolet Model: 2dr. Blazer 2WD/4x4: 4X4 Tire: 31/10.50/15 BFG A/T's Wheel: 15x8 Polished Eagle 186's Lift: N/A Torsion bar: Stock Cranked: 1" Keys: Stock Lift blocks: 2" Add A Leaf: N/A Body lift: N/A Aftermarket bumper: None Fender Measurements: 37.5" all around Trimming: None 02' HD- 8.1/Allison/3.73 Magnaflow/Blackbear/MAC/Cognito/PA/Procomp Xtreme Alloys/Toyo/Bilstein/Bushwacker 06' CC- 5.3(L59)/4L60E/3.73 Line-X/BFG/Rough Country/Blackbear/Flowmaster/Green CAI/Esky Handles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode