Post your LIFTED 2WD setup & how you use it! - Page 5

2wdchevywt · 09-13-2007, 05:15 AM

265/75/R15 with 4.10 gears 245K miles and about 14 mpg depending on how i'm driving it.

foots · 09-13-2007, 06:34 AM

Quote:

Originally Posted by romangmc

guys who have the 4.3's lifted or are experienced with it...what kinda guys mileage do you guys get and what is your rim and tire size???/

96 4.3 auto w/ 32x11.15x15 18 mpg city driving with wait4me tune

romangmc · 09-13-2007, 05:10 PM

If i was to put 33x12.50x20 with the Westers tuning and 4.11 gears...what type of gas mileage you guys would think i can get..from your experience????

2wdchevywt · 09-13-2007, 07:21 PM

what engine type?

romangmc · 09-14-2007, 12:18 AM

its just a regular V6 4.3....it aint no vortec or anything....

2wdchevywt · 09-14-2007, 05:31 AM

im gonna say around 16 +/- but i'm not sure. I get about 14 with 31's and 4.10's but my truck has 245k on it

txtrucker · 09-15-2007, 06:10 PM

I'm new to this. I have a 2006 extended cab. Just want to lift the front to level with back keeping as stock as possible. Any ideas on the easiest of equipment recomendations.

romangmc · 09-15-2007, 10:02 PM

prolly the easiest way is if you have coils....just put leveling kit in the front....and if its the independent then just maximize your torsion keys....right?

chevycoonazz · 09-22-2007, 03:03 PM

Quote:

Originally Posted by txtrucker

I'm new to this. I have a 2006 extended cab. Just want to lift the front to level with back keeping as stock as possible. Any ideas on the easiest of equipment recomendations.

coil spring spacers

koyota93 · 09-28-2007, 01:10 AM

2005 1500 5.3L
7" Fabtech
35" BFG Muds
18" KMC Monsters
So-Cal Pre-Run stance
Use it on the street. Its my daily driver, so I have other toys for the desert.

Mr.350 · 10-01-2007, 05:15 PM

Year: 95
Make: CHEVY
Model: 1500 ECSB 5.7 TBI
Gear size: 3.42
Tire Size: 31-10.5-15
Wheel Size: stockers
Lift kit size and Brand: RC 4" SPINDLE LIFT
Spacers: none
Lift Blocks: 2"
Add-A-Leafs: None
Body Lift: NONE
Aftermarket Bumpers: Front Grill Guard, Homemade rear pipe
Fender Height Measurements: 37.5 inches front, 37.5 inches back
Any fender or body trimming needed?: NONE

ruddly455 · 10-07-2007, 11:21 AM

Stock

Lifted

New wheels and tires

chevyspeed · 10-15-2007, 02:06 AM

4.5 CST lift w/ Bilstein 5100s 295/70/17 Nitto Terra's on 17x9s

Used to conquer the concrete jungle

wait

desert season is starting.

InestChevys2 · 10-29-2007, 11:33 PM

All I have to do is wait for the spring, Im getting a 4'' spindle, leaving the back stock, fiberglass front fenders, and 35's full prerunner style

2wdchevywt · 10-30-2007, 05:10 AM

Quote:

Originally Posted by InestChevys2

All I have to do is wait for the spring, Im getting a 4'' spindle, leaving the back stock, fiberglass front fenders, and 35's full prerunner style

doing anything to the rear? you think you can fit a 35 without anything done to the rear and not hit?

InestChevys2 · 10-30-2007, 08:41 PM

2wdchevywt I hope i dont have to do to much to the rear, except for some trimming on the fenders. The rear I am researching for clearance facts, like pullijg the stock sides. Ill probually upgrade to a 373 only because I drive alot or ill be at the dunes. I got first gear to spin the tires Cant wait

Joseph K · 10-30-2007, 09:32 PM

You'll need to do some trimming to fit the 35's well in the rear...

2wdchevywt · 10-31-2007, 06:05 AM

yea i would suggest putting a block in the rear just because if your bouncing around in the dunes your gonna want to. Your gonna tear that fender all to hell if you leave it stock. You can check out my gallery i have the 4" spindles and a stock rear

isenegger · 10-31-2007, 11:38 PM

i like the clean and simple look!

foots · 11-01-2007, 08:25 AM

Thanks !!

09-13-2007, 05:15 AM	#81
2wdchevywt 2WD MONSTER Status: Offline Join Date: Aug 2007 Member ID: 72902 Pics: My Gallery Location: Connecticut Age: 20 Posts: 790	Re: Post your LIFTED 2WD setup & how you use it! 265/75/R15 with 4.10 gears 245K miles and about 14 mpg depending on how i'm driving it. 1992 CHEVY 1500 WT 2WD 4.3 V6 4.10 GEARS, 31" TIRES, 4" ROUGH COUNTRY SPINDLE LIFT 2004 CHEVY 1500 Z71 5.3 SILVERSTAR ULTRAS IN HIGHS, LOWS, AND FOGS. PREDATOR TUNER, AFE INTAKE, FLOWMASTER 40 SINGLE IN DUALS OUT 06 Yamaha R6

09-13-2007, 05:10 PM	#83
romangmc Registered User Status: Offline Join Date: Sep 2007 Member ID: 74175 Pics: My Gallery Location: Gridley, CA Age: 22 Posts: 22	Re: Post your LIFTED 2WD setup & how you use it! If i was to put 33x12.50x20 with the Westers tuning and 4.11 gears...what type of gas mileage you guys would think i can get..from your experience????

09-13-2007, 07:21 PM	#84
2wdchevywt 2WD MONSTER Status: Offline Join Date: Aug 2007 Member ID: 72902 Pics: My Gallery Location: Connecticut Age: 20 Posts: 790	Re: Post your LIFTED 2WD setup & how you use it! what engine type? 1992 CHEVY 1500 WT 2WD 4.3 V6 4.10 GEARS, 31" TIRES, 4" ROUGH COUNTRY SPINDLE LIFT 2004 CHEVY 1500 Z71 5.3 SILVERSTAR ULTRAS IN HIGHS, LOWS, AND FOGS. PREDATOR TUNER, AFE INTAKE, FLOWMASTER 40 SINGLE IN DUALS OUT 06 Yamaha R6

09-14-2007, 12:18 AM	#85
romangmc Registered User Status: Offline Join Date: Sep 2007 Member ID: 74175 Pics: My Gallery Location: Gridley, CA Age: 22 Posts: 22	Re: Post your LIFTED 2WD setup & how you use it! its just a regular V6 4.3....it aint no vortec or anything....

09-14-2007, 05:31 AM	#86
2wdchevywt 2WD MONSTER Status: Offline Join Date: Aug 2007 Member ID: 72902 Pics: My Gallery Location: Connecticut Age: 20 Posts: 790	Re: Post your LIFTED 2WD setup & how you use it! im gonna say around 16 +/- but i'm not sure. I get about 14 with 31's and 4.10's but my truck has 245k on it 1992 CHEVY 1500 WT 2WD 4.3 V6 4.10 GEARS, 31" TIRES, 4" ROUGH COUNTRY SPINDLE LIFT 2004 CHEVY 1500 Z71 5.3 SILVERSTAR ULTRAS IN HIGHS, LOWS, AND FOGS. PREDATOR TUNER, AFE INTAKE, FLOWMASTER 40 SINGLE IN DUALS OUT 06 Yamaha R6


Home Forum Gallery Rules Downloads Supporting Member Ebay on FSC!

09-15-2007, 06:10 PM	#87
txtrucker Registered User Status: Offline Join Date: Sep 2007 Member ID: 74576 Pics: My Gallery Location: Austin, Texas Age: 39 Posts: 5	Re: Post your LIFTED 2WD setup & how you use it! I'm new to this. I have a 2006 extended cab. Just want to lift the front to level with back keeping as stock as possible. Any ideas on the easiest of equipment recomendations.

09-15-2007, 10:02 PM	#88
romangmc Registered User Status: Offline Join Date: Sep 2007 Member ID: 74175 Pics: My Gallery Location: Gridley, CA Age: 22 Posts: 22	Re: Post your LIFTED 2WD setup & how you use it! prolly the easiest way is if you have coils....just put leveling kit in the front....and if its the independent then just maximize your torsion keys....right?

09-28-2007, 01:10 AM	#90
koyota93 Registered User Status: Offline Join Date: Feb 2006 Member ID: 42132 Pics: My Gallery Location: Orange County Posts: 20	Re: Post your LIFTED 2WD setup & how you use it! 2005 1500 5.3L 7" Fabtech 35" BFG Muds 18" KMC Monsters So-Cal Pre-Run stance Use it on the street. Its my daily driver, so I have other toys for the desert. 05 Crew Cab Birch Silver - 7" Fabtech Lift - 18" Chrome KMC XD Monsters - 35" BFG Muds - Old School Eclipse Headunit - 2 JL 10s behind the seat - MB Quart Components - HID 4300K Lights - Bedrug - Billet Bow Tie

10-01-2007, 05:15 PM	#91
Mr.350 Official Smoke Detector Status: Offline Join Date: Mar 2006 Member ID: 43445 Pics: My Gallery Location: La Vernia, Texas Posts: 347	Re: Post your LIFTED 2WD setup & how you use it! Year: 95 Make: CHEVY Model: 1500 ECSB 5.7 TBI Gear size: 3.42 Tire Size: 31-10.5-15 Wheel Size: stockers Lift kit size and Brand: RC 4" SPINDLE LIFT Spacers: none Lift Blocks: 2" Add-A-Leafs: None Body Lift: NONE Aftermarket Bumpers: Front Grill Guard, Homemade rear pipe Fender Height Measurements: 37.5 inches front, 37.5 inches back Any fender or body trimming needed?: NONE 95 350 TBI, transgo shift kit, vette servo, flowmaster, Yukon 4.11's, Detroit TrueTrac, Full 4" RC lift, 4" blocks, 31x10.5 Mud Brutes, Pioneer system... Last edited by Mr.350 : 10-01-2007 at 06:17 PM.

10-07-2007, 11:21 AM	#92
ruddly455 Registered User Status: Offline Join Date: Oct 2004 Member ID: 20230 Pics: My Gallery Location: WY Posts: 51	Re: Post your LIFTED 2WD setup & how you use it! Stock Lifted New wheels and tires

10-15-2007, 02:06 AM	#93
chevyspeed Registered User Status: Offline Join Date: Sep 2007 Member ID: 74162 Pics: My Gallery Location: San Diego Age: 26 Posts: 167	Re: Post your LIFTED 2WD setup & how you use it! 4.5 CST lift w/ Bilstein 5100s 295/70/17 Nitto Terra's on 17x9s Used to conquer the concrete jungle wait desert season is starting. 2007 NNBS Silverado ext cab. 4.8 2WD Putco Grill, Gm Chrome Mirrors, Chrome Door handles, Tinted Kenwood DX6019,PDX1.6, 2 10in MB1 Superchips Programer, MagnaFlow Exhauast 4.5 CST lift w/ Bilstein 5100s 295/70/17 Nitto Terra's on 17x9s

10-29-2007, 11:33 PM	#94
InestChevys2 Registered User Status: Offline Join Date: Sep 2007 Member ID: 74580 Pics: My Gallery Location: Michigan Posts: 234	Re: Post your LIFTED 2WD setup & how you use it! All I have to do is wait for the spring, Im getting a 4'' spindle, leaving the back stock, fiberglass front fenders, and 35's full prerunner style BITCHES HATE, BUT WHEN I DRAG BY, YOU ALL WILL SPECTATE.

10-30-2007, 08:41 PM	#96
InestChevys2 Registered User Status: Offline Join Date: Sep 2007 Member ID: 74580 Pics: My Gallery Location: Michigan Posts: 234	Re: Post your LIFTED 2WD setup & how you use it! 2wdchevywt I hope i dont have to do to much to the rear, except for some trimming on the fenders. The rear I am researching for clearance facts, like pullijg the stock sides. Ill probually upgrade to a 373 only because I drive alot or ill be at the dunes. I got first gear to spin the tires Cant wait BITCHES HATE, BUT WHEN I DRAG BY, YOU ALL WILL SPECTATE. Last edited by InestChevys2 : 10-30-2007 at 08:42 PM.

10-30-2007, 09:32 PM	#97
Joseph K Registered User Status: Offline Join Date: Jul 2007 Member ID: 71535 Pics: My Gallery Location: Arkansas Age: 17 Posts: 716	Re: Post your LIFTED 2WD setup & how you use it! You'll need to do some trimming to fit the 35's well in the rear...

10-31-2007, 06:05 AM	#98
2wdchevywt 2WD MONSTER Status: Offline Join Date: Aug 2007 Member ID: 72902 Pics: My Gallery Location: Connecticut Age: 20 Posts: 790	Re: Post your LIFTED 2WD setup & how you use it! yea i would suggest putting a block in the rear just because if your bouncing around in the dunes your gonna want to. Your gonna tear that fender all to hell if you leave it stock. You can check out my gallery i have the 4" spindles and a stock rear 1992 CHEVY 1500 WT 2WD 4.3 V6 4.10 GEARS, 31" TIRES, 4" ROUGH COUNTRY SPINDLE LIFT 2004 CHEVY 1500 Z71 5.3 SILVERSTAR ULTRAS IN HIGHS, LOWS, AND FOGS. PREDATOR TUNER, AFE INTAKE, FLOWMASTER 40 SINGLE IN DUALS OUT 06 Yamaha R6

10-31-2007, 11:38 PM	#99
isenegger Registered User Status: Offline Join Date: Oct 2005 Member ID: 35200 Pics: My Gallery Location: victoria texas Age: 21 Posts: 286	Re: Post your LIFTED 2WD setup & how you use it! i like the clean and simple look! 1990 Chevy Cheyenne \| 2WD \| 4.3 \| TH400 \| 7" Fabtech \| 15x10 Neeper wheels \| 33x12.50 BFG All Terrains \|

11-01-2007, 08:25 AM	#100
foots Registered User Status: Offline Join Date: May 2007 Member ID: 68914 Pics: My Gallery Location: Alabama Posts: 46	Re: Post your LIFTED 2WD setup & how you use it! Thanks !!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode