Peelin Rubber In A School Bus ?

[BaggedBurban305]

So Ive Been In Both My Friends Trucks One Being A S10 And The Other A Silverado And From A Dead Stop Pounding The Gas They Both Peel Very Nice And Im A Little Jelous.what Would It Take To Peel A Little Rubber In My 95 Suburban C1500 2wd G80 3.73 265/35/22 350 Tbi With Every Bolt On Possible And A Cam.let Me Know What You Guys Think ?

[ibanender]

Originally Posted by FROMTHABOTTOMCC

So Ive Been In Both My Friends Trucks One Being A S10 And The Other A Silverado And From A Dead Stop Pounding The Gas They Both Peel Very Nice And Im A Little Jelous.what Would It Take To Peel A Little Rubber In My 95 Suburban C1500 2wd G80 3.73 265/35/22 350 Tbi With Every Bolt On Possible And A Cam.let Me Know What You Guys Think ?

You could start by putting lighter wheels on it, taking rear seating out, and then adding power.

[kirk]

572 BBC, 8-71 blower, 4.10's.

Or, for a slightly cheaper approach, lighten it up as much as possible, some 4.10's, and a little more power.

[BaggedBurban305]

Wheels Are Billet Aluminum And Are Preatty Darn Light And About Building The Engine Im Looking For A More Str8 Foward Answer So If You Do Know What Your Talking About Be A Lil More Specific Other Than Just " Build The Motor "

[SuperStepside]

Do you have a chip that got rid of torque management?

[daved931]

Do a brakestand.

[heavychevy06]

torque management might be one reason.

But, 4.10's will help alot, cause i know a few guys that can roast the tires at all, not even a chirp and they have 3.42's. I have 4.10s and with alittle brake i can sit still

[Mkader17]

if you already have a cam and can't spin the tires something is wrong

[Nascarfreak88]

N2o

[95tahoe95]

Neutral, 4k rpms, drive she will roast em good i promise!!!

[1989K1500]

Heres how you do a burnout in a school bus.

http://videos.streetfire.net/video/7...-set_92912.htm

[567234ta]

run tubes from your windshield washer jets to the rear tires and wet them down.

[DarkCharisma]

You have 22's, 3.73's, and a TBI. It's going to need a lot of help. I'd start with gears and a higher stall.

[bobfig]

umm did any one notice that he had a g80? if you are going to do this git ready to replace the rear end.

Originally Posted by 95tahoe95

Neutral, 4k rpms, drive she will roast em good i promise!!!

That's a good way to roast the drivetrain.

[2500ak]

What kind of cam grind are you running? I get the feeling that the problem is stall and maybe gears. If you're cam likes higher RPMs it may have lost a little low end, if that's the case then the converter won't let it jump up in the revs quick enough to break traction. That and perhaps you still have some torque management holding it back.

seriously, just look at my combo in my sig... i guess ill make a video today, or when i get my new tires on, cause i burnt holes in the old ones.

[BaggedBurban305]

Cam Is A 467/494 Crane And I Have A 2600 Stall Converter.ive Already Broke My Rear End But The G80 Survived.doing A Brake Stand I Broke The Head Off One Of The Bolts That Hold The Axle Bearings.the Bolt Got Between The Gears And Pinion And Tore My Old 3.42's To **** Then Exited Out The Diff Cover.i Then Slapped On Some 3.73's Off A 4x4 Burban I Had Laying Around.most Ive Ever Heard Out Of The Truck Is A One Wheel Chirp Which Stops Right Away When G80 Locks Up.i Do Have A Tbichips Prom And I Belive I Still Have Torque Management ? Next Mod Im Doing Is Some Ported Zz3 Heads And Roller Rockers.my Old Man Can Probably Get Them Free And Theyll Just Bolt On.

[BaggedBurban305]

Originally Posted by Tbi-MAX

seriously, just look at my combo in my sig... i guess ill make a video today, or when i get my new tires on, cause i burnt holes in the old ones.

I ALREADY HAVE EVERYTHING YOU HAVE IN YOUR SIG EXCEPT MY GEARS ARE SMALLER AND IM YET TO PUT NEW HEADS ON WHICH WILL BE MY NEXT MOD.

[cttandy]

Boy, my 94 4x4 burb with 36 inch mud tires, stock 3.73 gears and g80 would roast the tires to no end. It has a bone stock 454 TBi in it.

My 97 4x4 Tahoe with 3.42's g80, bone stock would smoke the back tires so hard the truck would try to turn around on you.