built vortec 454 vs. built 6.0??

[the_husk]

I second just working with what you have. You cannot go wrong with the guys over on pacificp. They know the these L31's inside and out.

[james_8997]

iv beeen talkin to them, and i am amazed about the knowledge of some of them people.

next on my list is smaller tires, and lower gears (4.11s) after that a stall converter, than ill start playin more with the motor

[JohnnyRingo]

if this is the route your gunna go are you going to remove all 4x4 parts from the truck? cause that will just be worthless weight, and every pound counts.

[james_8997]

no, imo, i can still use 4high for awesome traction

[JohnnyRingo]

yeah i guess so i was just looking at a strip point of view. take those parts out and have a set of track wheels and tars and light weight gripin action

[james_8997]

you cant just 'take out' front wheel drive parts, they are needed

[01SilvyZ71]

keep the cv's in for 4 wheel drive launches....

[GreaseDog]

Originally Posted by james_8997

you cant just 'take out' front wheel drive parts, they are needed

actually you can. the only part you "need" is the outer stus of the CV and the associated nut. without them, your front hubs will fall apart. everything else can be trashed.

[JohnnyRingo]

Originally Posted by GreaseDog

actually you can. the only part you "need" is the outer stus of the CV and the associated nut. without them, your front hubs will fall apart. everything else can be trashed.

thank you

[james_8997]

o i see. i was told you couldnt. thanks for clearin that up

[StreetFreak]

Gold Glitter valve covers make everything faaaast.

[james_8997]

still lookin hunter, no luck.

[Outlawz2004]

I am still awaiting Fast305's return to answer about the videos he posted. James, if you are gonna go gold on the valve covers, might as well do the wheels to. LOL

[V6rado94]

Gold spoke wheels just like fast305's van

[Outlawz2004]

Originally Posted by V6rado94

Gold spoke wheels just like fast305's van

LMFAO awesome, thats what he has been up to.

[V6rado94]

Well it reduces weight by about 50lbs so he can keep that kick ass 305

[EvilMonkey]

Originally Posted by Fast305

My handicap is a small engine with no converter and tall gearing/tire combination with Electronic Throttle Control.. ALOT worse than torque management, because it cuts power when the wheels spin like a traction control.

The Ram on the Left is Randy Halls Hemi. The one on the right is my 4.7. (If I had his 4.56s and 3,000+ stall the launch would be different)

http://www.youtube.com/watch?v=SJv4W...eature=related

Another you might like..

http://www.youtube.com/watch?v=-baMLCGNDZo

Those WEAK 3.55 gears dog this truck bad out of the hole.

http://www.youtube.com/user/evilmonk.../2/PSlBfhMp6SI

This is an early 06 Ram with a 2008 4.7 swapped into it, bolt-ons and DIY SCT custom tuning.

i don't know who you are, but i don't take too kindly to using my videos as your own. i have a lot of time and pride invested in my truck. it may not be the fastest thing out there, but it's mine. thanks to Outlawz2004 for looking out

[NIght Runner]

Originally Posted by Fast305

My handicap is a small engine with no converter and tall gearing/tire combination with Electronic Throttle Control.. ALOT worse than torque management, because it cuts power when the wheels spin like a traction control.

The Ram on the Left is Randy Halls Hemi. The one on the right is my 4.7. (If I had his 4.56s and 3,000+ stall the launch would be different)

http://www.youtube.com/watch?v=SJv4W...eature=related

Another you might like..

http://www.youtube.com/watch?v=-baMLCGNDZo

Those WEAK 3.55 gears dog this truck bad out of the hole.

http://www.youtube.com/user/evilmonk.../2/PSlBfhMp6SI

This is an early 06 Ram with a 2008 4.7 swapped into it, bolt-ons and DIY SCT custom tuning.

Thats funny Bro. because the truck in the video is Rich from Denton and not a 4.7 The first 2 vids you linked to are not you, unless you are Rich and if that is the case, you sir have a HEMI not a 4.7. The third link even has his screen name in the link Evilmonkey. Check him out for real on DFWRAMS.com

http://www.dfwrams.com/member.php?u=12


You shouldnt use footage you find online and claim as your own, especially when they are so close to home and so NOT you.

[Badass69]

This is just awesome. So where are you Fast....... Lieing on some other board about trucks you have never owned. I remember you constantly posting these supposed 4.7 vids...... except the guage cluster never matched the age of the truck you said it was. Even better is that the truck in the videos you linked is 05 and older ( yes its a confirmed 2004) but yet you call it a 2006 and sometimes a 2008. At least rip off videos with the right body style and correct era of dash cluster. Better stick with that sweet pedo van....... or is that some other persons too?

I had an 09 Hemi Ram that I sold because I hated it. Even in 4wd the stupid thing could never 60' better than a 2.3 with all the torque management Dodge has trying to save the 545RFE. Don't care now........ truck is someone elses problem.

My vote is a blown 6.0 litre but I like small blocks, efi and forced induction. Big blocks are fun too........ but the Gen 3's are just so easy to mod and easy to come by.

[james_8997]

Originally Posted by EvilMonkey

i don't know who you are, but i don't take too kindly to using my videos as your own. i have a lot of time and pride invested in my truck. it may not be the fastest thing out there, but it's mine. thanks to Outlawz2004 for looking out

i understand that probly pissed you off, just wanted to say sorry, and IMO, that dodge runs pretty good. welcome to FSC(or did you join just to chew fast305 outlol:) if so, i dont blame you