Fullsize going under the knife...again - Page 11

jcfreeman0 · 06-02-2008, 10:01 PM

got some work done on it tonite. burkett welded in the new bed corner. LMC only had a long bed corner so it had to be chopped up. tayfur helped grind down the link and i just painted it. also laid out the front on some boards to make sure she still lays on the bigger tires.

indiglo5997 · 06-02-2008, 11:44 PM

Did you figure how the link line broke? I also was wondering how did you crack your rims? Pot hole? But besides all the question truck is looking

jcfreeman0 · 06-03-2008, 05:42 AM

the bag mounts needed to be supported some more but i cut them off and burkett is going to build a cantilever setup above my axle so it fits under the bed. the wheels bent and cracked from big ass cut outs in the road. i swear it was construction atleast half way to tennessee.

1lo98 · 06-03-2008, 05:43 PM

awesome truck!

91blkstpsd · 06-04-2008, 09:48 PM

Quote:

Man I cant believe you drove it there! I had no idea that you did when I saw you. Sucks about all the bad luck you guys were having. That thing was looking clean though, and I cant wait to see it at Havoc!

Couldnt believe it either! did look real good there though! Hope you get all the bugs worked out too man. See ya at Havoc also. This time ill compete in the sport truck challenge with nitrous. :) Havent decided if I want to trailer or drive it yet.

jcfreeman0 · 07-11-2008, 10:29 PM

got my new wheels and tires today. 2 brand new wheels and 4 brand new Khumo 275/30r24 tires. i ran into some problems though...tires hit the firewall, tires hit the hood, fram hits the 2 link. All three of these are keeping it from laying out. Time to get out the cut off wheels...

mx831 · 07-12-2008, 09:39 AM

Truck's looking good JC, I just bought a 29 Ford sedan project so my truck has taken a back seat. Keep it up, looks great.

jcfreeman0 · 07-12-2008, 11:02 AM

hell yeah sounds badass. make sure you post some pics of that!. You going to ITB again this year?

bhookxen · 07-12-2008, 12:45 PM

subscribed!

also noticed you're in the dayton area as well. too cool to see such a nice ride around these parts.

keep up the good work man! lookin AWESOME!!!

mx831 · 07-12-2008, 02:55 PM

Quote:

Originally Posted by jcfreeman0

hell yeah sounds badass. make sure you post some pics of that!. You going to ITB again this year?

I don't know if ill make it to ITB or not... We'll see. Here's some pictures... Yes everyone, I know it's not a FSC but it was requested by the originator of this thread.

jcfreeman0 · 07-13-2008, 12:58 PM

badass! that thing is freakin awesome!

91blkstpsd · 08-07-2008, 03:01 PM

Looking good! Wish I could have made it up there for the show. Guess there is always next year.

06-02-2008, 10:01 PM	#201
jcfreeman0 Registered User Status: Offline Join Date: Jul 2006 Member ID: 51434 Pics: My Gallery Location: Dayton, OH Posts: 110	Re: Fullsize going under the knife...again got some work done on it tonite. burkett welded in the new bed corner. LMC only had a long bed corner so it had to be chopped up. tayfur helped grind down the link and i just painted it. also laid out the front on some boards to make sure she still lays on the bigger tires.

06-02-2008, 11:44 PM	#202
indiglo5997 I'd Buy That For A Dollar Status: Online Join Date: Jun 2005 Member ID: 29834 Pics: My Gallery Location: Pleasanton Age: 21 Posts: 833	Re: Fullsize going under the knife...again Did you figure how the link line broke? I also was wondering how did you crack your rims? Pot hole? But besides all the question truck is looking

06-03-2008, 05:42 AM	#203
jcfreeman0 Registered User Status: Offline Join Date: Jul 2006 Member ID: 51434 Pics: My Gallery Location: Dayton, OH Posts: 110	Re: Fullsize going under the knife...again the bag mounts needed to be supported some more but i cut them off and burkett is going to build a cantilever setup above my axle so it fits under the bed. the wheels bent and cracked from big ass cut outs in the road. i swear it was construction atleast half way to tennessee.

06-03-2008, 05:43 PM	#204
1lo98 Registered User Status: Offline Join Date: Jul 2007 Member ID: 70833 Pics: My Gallery Location: Maine Age: 23 Posts: 106	Re: Fullsize going under the knife...again awesome truck!

07-11-2008, 10:29 PM	#206
jcfreeman0 Registered User Status: Offline Join Date: Jul 2006 Member ID: 51434 Pics: My Gallery Location: Dayton, OH Posts: 110	Re: Fullsize going under the knife...again got my new wheels and tires today. 2 brand new wheels and 4 brand new Khumo 275/30r24 tires. i ran into some problems though...tires hit the firewall, tires hit the hood, fram hits the 2 link. All three of these are keeping it from laying out. Time to get out the cut off wheels...


Home Forum Gallery Rules Downloads Supporting Member Ebay on FSC!

07-12-2008, 09:39 AM	#207
mx831 Registered User Status: Offline Join Date: Aug 2004 Member ID: 16969 Pics: My Gallery Location: Michigan Age: 22 Posts: 209	Re: Fullsize going under the knife...again Truck's looking good JC, I just bought a 29 Ford sedan project so my truck has taken a back seat. Keep it up, looks great. Remember: You can sleep in your ride, but you cant drive your house.

07-12-2008, 11:02 AM	#208
jcfreeman0 Registered User Status: Offline Join Date: Jul 2006 Member ID: 51434 Pics: My Gallery Location: Dayton, OH Posts: 110	Re: Fullsize going under the knife...again hell yeah sounds badass. make sure you post some pics of that!. You going to ITB again this year?

07-12-2008, 12:45 PM	#209
bhookxen Registered User Status: Offline Join Date: Jan 2006 Member ID: 40504 Pics: My Gallery Location: centerville, ohio Age: 27 Posts: 10	Re: Fullsize going under the knife...again subscribed! also noticed you're in the dayton area as well. too cool to see such a nice ride around these parts. keep up the good work man! lookin AWESOME!!! - i'm new 1996 K1500 Suburban, 6" rough country, 35 toyo a/t's, 17x9 eagles, 4.56 yukon gears, yukon shafts, & a detroit all in a 10-bolt (don't ask - it was just cheaper/easier at the time) 1998 Chevy ECSB K1500 - 1-inch block, crank, 285's 1997 Dodge Intrepid - 20" ghetto wheels

07-13-2008, 12:58 PM	#211
jcfreeman0 Registered User Status: Offline Join Date: Jul 2006 Member ID: 51434 Pics: My Gallery Location: Dayton, OH Posts: 110	Re: Fullsize going under the knife...again badass! that thing is freakin awesome!

08-07-2008, 03:01 PM	#212
91blkstpsd Slow Truck Status: Offline Join Date: Jan 2005 Member ID: 22825 Pics: My Gallery Location: Tennessee Age: 23 Posts: 963	Re: Fullsize going under the knife...again Looking good! Wish I could have made it up there for the show. Guess there is always next year. http://www.myspace.com/newdrewman '06 CC Z71, RC leveling kit '91RCSB:LT1 & 4L60E swap,LT4 cam,1.6RR,52mm BBK TB, ceramic headers,MSD ignition,8mm wires,Built trans,TransGo SK,TCI stall,Ultralite Gauges,leather+suede,billet,4-6 drop, 20"s Last edited by 91blkstpsd : 08-07-2008 at 03:13 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode