2low4nd's OBS RCSB 91 GMC converted Bag PROJECT, pictures inside. here we go!

[2LOW4ND]

what is 50mm offset in inches????

[2LOW4ND]

Originally Posted by ikon

Ballin!

Im not sure if they are gonna fit, thats why i was asking about your wheels that you have for sale...

[ikon]

1.968503937007874 inches and my wheels are six lug...just thought of that

[AZdragginsoon]

lookin good man

[2LOW4ND]

Originally Posted by ikon

1.968503937007874 inches and my wheels are six lug...just thought of that

So thats 9 inches of backspace then, then a 1.25" adapter so that is 7.75 inches of backspacing.

Wait i forgot the wheel was 10.5 and not 11...

Ahh forget it im shot. Ill figure it out tomorrow.

[2LOW4ND]

TPICHEVYs

post in another thread.

Hey man i was in the same boat your in now a while back! i was lookin to run the zr1 wheels also and i have come up with a bunch of info for the swap! i still would like to grab some black zr1s for the track!! i ended up findin some 17x9.5s w/5.5"bs and 17x11s w/7"bs there a tight fit but they look sick!!
anyways here is a bunch of the info for ya! keep us posted bro, its goin to look sick!!!
17x9.5=38mm-6.7"
17x9.5=56mm-7.4"
17x11=36.5mm-7.4"
17x11=50mm-7.95"
http://www.fullsizechevy.com/forums/...-bad-idea.html

Best adapters made out there IMO!!
http://www.skulte.com/index.php/cPat...a3f7979d121372
http://www.fullsizechevy.com/forums/...w-o-tubin.html

454ss is runnin adapters and is makin a **** ton of HP with no probelms!
http://www.454ss.com/hosts/web/members/sixspeedss/
http://www.fullsizechevy.com/forums/...archid=2198965

[4mcrue]

So, I guess we aren't going to the desert next spring??
LOL.

[bizzybone485]

i cant wait to see those on there. I see them fitting very well but choose your tires correctly. Thats my $.02. Its gonna look sick!!

[2LOW4ND]

Originally Posted by 4mcrue

So, I guess we aren't going to the desert next spring??
LOL.

haha, dont think so dave.

[2LOW4ND]

Originally Posted by bizzybone485

i cant wait to see those on there. I see them fitting very well but choose your tires correctly. Thats my $.02. Its gonna look sick!!

Thats what im thiking. I see guys running 10 wide all the time with less of a backspace and more of a front lip on the wheels and they fit. Im running the max amount of backspace no lip and spacer so I get my 4 link mounted up and the wheels and spacers to the shop i wont know. Its driving me nuts.

[99gixxer]

this is gonna be sweet.

-subscribed-

[2LOW4ND]

I keep leaving my lovley high quality canon digi at the shop. There will be tons of pictures up in the next few days. As for a setup goes its nice and clean. Everything will be mounted under the bed. Two Guages in a guage pod in the cab. One guage for the tanks and one dual needle guages for the front bags and rear bags. Im running up down, front and back. No side to side.
2 - chrome viar 400s
4 - SMC Fill Vavles 1/2 inch
4 - SMC Dump Vavles 1/2 inch
1 - 8 gallon 8 port tank
2 - Front conititech 4 ply 2600
2 - Rear conititech 4 ply 2600
1 - Dual needle easy street guage for bags
1 - Single needle east street guage for tank
2 - rolls 50 feet of air line for guages
1 - roll 50 feet of air line for vavles
1 - 1/2 water tap
1 - viar pressure switch and relay
2 - water traps

For metal.

KP 4 link
Front cups
2" drop spindles
Front shock relocator kit
Rear shock relocator kit
Rear bag mounts
Step Notch

[ikon]

is there any way i can talk you into fbss...please...cause ill tell you flat out right now youre gonna have so much damn body roll on that bitch with f/b ur gonna hate urself for not spending the xtra money and running 8 valves.

[|3lack$ilverado]

Originally Posted by ikon

is there any way i can talk you into fbss...please...cause ill tell you flat out right now youre gonna have so much damn body roll on that bitch with f/b ur gonna hate urself for not spending the xtra money and running 8 valves.

The setup he posted has 8 valves.

[tonxcab]

good luck imo i think the wheels be bad ass

[ikon]

Originally Posted by |3lack$ilverado

The setup he posted has 8 valves.

well he said hes just running f/b...not f/b/s/s. i didnt actually take the time to read the individual parts list

[2LOW4ND]

Originally Posted by ikon

well he said hes just running f/b...not f/b/s/s. i didnt actually take the time to read the individual parts list

Im wiring them up that way. Still running 8. Thanks for looking out though dave.

[ikon]

werd

[drpdshrty]

my wheels are 10" wide with 6" backspacing. all i did was roll the rear fender lips. I did add a rear sway bar to help with body roll.

[2LOW4ND]

Originally Posted by drpdshrty

my wheels are 10" wide with 6" backspacing. all i did was roll the rear fender lips. I did add a rear sway bar to help with body roll.

So from what you saw with my math and backspace and offset, sounds like it should be close, huh? Im running a little more backspace with a 1.25" spacer. Might be right on??
This is tricky cuz there are only you and TPICHEVY who are running this wide of a setup without tubbing.
From what im aware of.

Thanks for chiming in.