2low4nd's OBS RCSB 91 GMC converted Bag PROJECT, pictures inside. here we go!

[Inverter]

Originally Posted by 2LOW4ND

Thank you sir.
Everything is relocated under the hood so im good to go there.
Im just gonna take it to the muffler shop right away, but frist i need to find someone to slap on my chrome headers for me, i dont wanna deal with the headers.. I also have a full race summit racing muffler for the muffler shop to weld on also.
But as soon as i get the truck rolling the first place its going b4 it comes back to my garage is the muffler shop!

Awesome! So i guess its gonna be an open header run to the muff.shop? I love those trips and Chrome headers,no less... Youz uh Ballah!!

[2LOW4ND]

Originally Posted by Inverter

Awesome! So i guess its gonna be an open header run to the muff.shop? I love those trips and Chrome headers,no less... Youz uh Ballah!!

Yes balla chrome headers, let alone open headers bagged FULLSIZE rolling down the street! haha.. = sickness! haha.

[Inverter]

sickness !!!

[Pre-Game]

i was busy lately, just saw this thread looking very nice! me likey

[2LOW4ND]

Cut the y pipe off sunday, helped it lay down another inch or so.

Then i found out i had cut down my bag cups :/ got that takin care of today.

[2LOW4ND]

edit* I think alot of people lost interest on my project since i pushed my vette wheels off till late spring. :P

[tpichevy]

haha no sorry im back but im glad your still goin to try the vette wheels, if they dont workout for ya i might have to make them work for me

trucks lookin sick by the way...keep the pics commin!!

[bizzybone485]

Yeah bro keep the pics coming i wanna see her all cleaned up! But yeah definately keep the idea of the vette wheels. I think im going the same route but different style.

[96thebossgrnchv]

damn that looks good man!

[BigBadBowtie572]

Originally Posted by 2LOW4ND

I like this shot! I like the buildup so far. The smoothies are nice but Vette wheels must go back on, not later, now.

[bizzybone485]

yeah dude get those vette wheels on there cause i need some guidlines. Im curious to how they will sit on there although your running bags and im not.

[2LOW4ND]

Oh yes i will be playing around with the VETTE wheels.

Well ended up cutting the lower cups, no see how hard it lays in the front now too!!!!!

****ty cell phone picture, didnt have my camera with.

[2LOW4ND]

The bags will be finished up and the truck will be rolling on the ground and finished sat!

[Nickleahy23]

clean man..real clean..On a side note, how are those drilled and slotted rotors? Everyone is telling me to stay away from them because they can crack? I dont know how true that is and im sure you havent gotten to use them but ya..keep up the good work

[ikon]

Ive seen ceramic pads make them crack but regular pads you should be fine.

[2LOW4ND]

I installed them during the bag instll so they havent been used yet. They come with there own pads too.

[bizzybone485]

What kind of pads do they come with. I just went with powerslot's rotors and hawk pads cause a lot of people were talking a lot of them and didnt really hear anything bad about them. Amazing setup! Thats really all i have to say about them. The only thing that im worried about is the the pulling to the left and im not sure if i should blame it on the swap or because of alignment being done, rims being put on or what. It almost seems as if it floats when im braking hard so i dont feel that its from the brakes. Otherwise awesome setup. I even went with the Russell lines from summit and they were nothing to install. I highly recommend them. I love the braking and i still havent dont the rear. Those will give me a little stronger pressure so wewll see what happens. Although i did do the rears as well so im ridin new brakes all the way around. Those yellow lights have been catching me lately and ive had no problem stopping. Hope that helps a little bit.

Anyways, enough rambling on your post bro...haha. Looks good. I calculated that those wheels should fit on there bro. 11 inches in the rear is about the biggest you can put back there but the should fit. Although it seems as if you have 12 inches wide according to the pics of the wheels? anyways! i think the boyd coddingtons would look sick bro! are you going with 20s?

[Marcos]

Looks good, but don't the compressor's get restricted by teeing them together? And it looks like you might have to much threads showing on your bars but I can't tell, just want to make sure you don't mess you sweet ride up...

[Inverter]

Hey 2,,You been gettin stuff done.Looks B/A!!You gonna get the bed on Sat.too? Take some photos for my Sunday morn. coffee!

[2LOW4ND]

Originally Posted by Marcos

Looks good, but don't the compressor's get restricted by teeing them together? And it looks like you might have to much threads showing on your bars but I can't tell, just want to make sure you don't mess you sweet ride up...

Everything was set we kinda took everything back apart. You see where the threads are painted thats where they are set.
The compressors situation, im really not sure of, I have never really heard of that. I guess.