2low4nd's OBS RCSB 91 GMC converted Bag PROJECT, pictures inside. here we go!

[2LOW4ND]

edit 1-30-08 picture updates.


edit 1-28-08 bad mistake- check the last page!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This was found out after i decided to keep and make the wheels work!!!!!!!!!!!!!!


edit 1-15-08 there are updated pictures further through the thread guys.







Sorry for the ****ty cell phone pictures. Ill will have nice pictures with my digi from here on out!
Well got my truck to the shop tonight and got an ok start on it. It was kinda late by the time I got off work and it up there.
First tonight we torr off all the JC Whitney bull**** that was on it, haha. Bug gaurd, chrome frender trim, mudflaps, cheap bedcover, factory moldings etc. Cut some exhuast off, and took the bed off.

Tomorrow will be clean up the rest of the body and take the rest of the rocker panels off, and take the dorky pinstrip off and stat with some notching and on with the bag stuff.

As some of you know im worried about fitting my ZR1 Vette wheels on the back... 17x11s i think i screwed up on that move, we will see.

Anyways, I will keep updates as we go, should have the truck done in about 3 weeks.

I will keep everyone posted with pictures and info.

Im amped!!!

now with some ****ty pictures.

[96thebossgrnchv]

looking forward to seeing the progress unfold man!

[2LOW4ND]

oh yes, almost forgot, do i need 2" drop spindles to lay out up front?
With stock arms?

[Marcos]

Not unless you want to lay a 27" tire or bigger, But you wont have to cut as much, I strongly recommend them...

[iLLimpulse]

Who is this... Kyle??

Its Corey from Winnipeg.

[BagginA93chev]

good progress so far keep us updated!

[2LOW4ND]

Originally Posted by iLLimpulse

Who is this... Kyle??

Its Corey from Winnipeg.

No this is a good buddy of kyles and adam and Steve and AJ. I take it your gonna know all of them. We have been friends for years. Im actually going to be Adams brother in law after this summer his older sister and I are getting married. And Steve is my best man. sorry that was Offtopic. I take it you meet them up with them at a few shows.

Im Mikey by the way, haha.


More updates tonight guys!

[project 92]

Hey Corey its Dan from winnipeg nice to see you on here..

[project 92]

Sorry 2low. Clean lookin truck!!

[iLLimpulse]

Originally Posted by 2LOW4ND

No this is a good buddy of kyles and adam and Steve and AJ. I take it your gonna know all of them. We have been friends for years. Im actually going to be Adams brother in law after this summer his older sister and I are getting married. And Steve is my best man. sorry that was Offtopic. I take it you meet them up with them at a few shows.

Im Mikey by the way, haha.


More updates tonight guys!

Yeah I know all those guys, we went to reso 2 years ago with them, and ITB the past 2 years, and they've come up here to our show the past 2 years as well.

You'll have to join them this year!

Kyles truck is lookin killer now that its finished!

Lookin forward to the progress on this one!

[iLLimpulse]

Originally Posted by project 92

Hey Corey its Dan from winnipeg nice to see you on here..

Haha.. what up dude!

[92 Z71]

I'm jealous man, can't wait to see it done.

[2LOW4ND]

No updates tonight, left the camera at the shop. the next few days should be killer though. Thanks for the support guys.
Oh and Corey i told Kyle whats up for ya tonight. haha.

[bizzybone485]

Cant wait to see this buildup. ITs gonna look good. If you cant get the rims to fit i would say make them fit...lol. Cut the bed if anything... tub it. Its not like its gonna look bad...just more work. Good luck. Looking forward to this post.

[2LOW4ND]

EDIT THESE ARE THE FRONT WHEELS NOT THE REAR - 1-30-08 update.

Taking a night off, the camera is still at the shop so again no updated pictures of the truck.
my ZR1 wheels came in today and they are actully measuring 17x10.5 a little less. Im thinking with the flat front face of he wheel and no lip it will deff tuck even with a 1.25" adapter. Being there is no front lip. And Being is a 10.5" wide wheel im thinking the space should pull it away from my 4 link just enough, what do you guys think??

Tomorrow i really will find out.

crappy cell phone pictures of the wheels.
I really think with a 50mm offset at 17x10.5" wide they will fit with the 1.25" adapter.

[96thebossgrnchv]

i'm pretty sure they'll fit too, c4 rims have tons of backspacing

[2LOW4ND]

Originally Posted by 96thebossgrnchv

i'm pretty sure they'll fit too, c4 rims have tons of backspacing

I was kinda curious on turning radius with 17x9.5 up front too. Im doing a test fit tomorrow if my damn adapters show up.

[96thebossgrnchv]

i think tbichevy has some wide rims up front, not sure how wide though

[2LOW4ND]

Thats right he posted in my other thread on the wheels.

[ikon]

Ballin!