YUKNTUKN22S Build thread......

[91blkstpsd]

355 Splayed 4 bolt block, Scat forged rotating assembly, vortec heads, xfi comp cam, GMPP tbi intake, tbi mods, tick flow fpr, Wysco 1 5/8 headers, high flow cats, flowmaster 40 series mufflers. Plus the procharger that now has a 3.4 pulley which puts it at about 9lbs at 4000, with a stock procharger bypass.

Oh thats it? Haha Jk sounds great! have you ever ran it on a track?

[YUKNTUKN22S]

Originally Posted by 91blkstpsd

Oh thats it? Haha Jk sounds great! have you ever ran it on a track?

No I havent, I actually just got it running right. Im just happy to be able to drive it down the road! And be able to get on it every now and then. Maybe I will take it to the track one day.

[91blkstpsd]

No I havent, I actually just got it running right. Im just happy to be able to drive it down the road! And be able to get on it every now and then. Maybe I will take it to the track one day.

Same here. I just care that mine runs and drives, will worry with the rest later on.
Do you have the stock running gear or ?

[jcfreeman0]

nice build man. sounds like you've been busy lol! looks great!

[YUKNTUKN22S]

Originally Posted by 91blkstpsd

Same here. I just care that mine runs and drives, will worry with the rest later on.
Do you have the stock running gear or ?

Yes, pretty much, the trans has been beefed up a bit , but the rear gear is stock. Well see how long it lasts!

[91blkstpsd]

When are you ever gonna get a sig?

[91blkstpsd]

Hope you dont mind me posting but here it is at the show. IT looks real good in person. Nice build. Anymore plans for it or another project?

[YUKNTUKN22S]

I am going to do some fiberglassing work for a console and then something for the back. Ive got some good pics of it that I will pst up later on.

[91blkstpsd]

I am going to do some fiberglassing work for a console and then something for the back. Ive got some good pics of it that I will post up later on.

Alright, sounds good. Did you do all the interior work yourself? I have another dash at home that already smoothed and Im going to paint it and wrap the center section in suede.

[YUKNTUKN22S]

Originally Posted by 91blkstpsd

Alright, sounds good. Did you do all the interior work yourself? I have another dash at home that already smoothed and Im going to paint it and wrap the center section in suede.

Sounds good, yes I did the interior myself.

[MR. DO!]

I Just Need To Get This Off My Chest. Between You And 3 Up Your Truck Build IS The Best Ive Seen On This Site. Everyday I Come In And Check To See If You Have Posted Anything Before I Even Check Espn Thats How Great Your Build Has Been. I Take My Hat Off To You My Man. Hats Off Great Lookin Truck And I Hope You Enjoy It Every Chance You Get!!!! That Truck Needs to Be Showed Off Every Bleeping Day. Wish I Could See It In Person. I Challenge Anyone To Show A Build From Start To Finish That Can Compare To Either On Of Those To Builds. IM DONE FINISHED

IF POSSIBLE CAN YOU TAKE SOME PICTURES OF THE THE TRUCK FROM ALL ANGLES AND POST. I WOULD GREATLY APPRECIATE IT

[Crazed179]

get a room

[MR. DO!]

Can I Use Yours Since U Dont.

[Crazed179]

I think I'm gonna go cry now.

btw yukntukn22s, where did you do all your frame work at? do you own a shop or go to a tech college or something

[YUKNTUKN22S]

I was a parts manager at a local body shop, here in nashville, and that is where the frame work and the body was done afterhours. Me and a friend built the frame using a shark measuring system just to make sure it true. Other than the frame and the paint every thing else was built in my garage. Plus I dont work for that shop anymore.

[wagonwhatmp5]

damn that is one hot yuk