Kirk's truck - Page 14

kirknd4spd · 10-31-2009, 06:10 PM

Quote:

Originally Posted by V6rado94

They'll really shine with an amp on them.

When you get the money you need to go ahead and deaden your doors and add a mdf baffle if you already haven't.

After I get the sub in there, and both amps, the next project is gonna be to deaden the cab. But I want everything for the system first.

V6rado94 · 10-31-2009, 06:14 PM

deadening is the best thing I've done to my truck so far. You should see it when I crank it a little and the back window starts to flexs about an inch.

94383Z71 · 10-31-2009, 06:57 PM

Quote:

Originally Posted by V6rado94

deadening is the best thing I've done to my truck so far. You should see it when I crank it a little and the back window starts to flexs about an inch.

my buddies windshield did that, and now there's a hole that looks like he was shot at, but it's not all the way through

V6rado94 · 10-31-2009, 07:28 PM

Quote:

Originally Posted by 94383Z71

my buddies windshield did that, and now there's a hole that looks like he was shot at, but it's not all the way through

Well my windshield flexs about a 1/8in or soo. Not to bad. My windshield is all spider webbed anyways.

kirknd4spd · 11-01-2009, 08:00 PM

Ok, so I've been meaning to post these pics all day, but I've been gone. So, here's what audio stuff I've done so far:

And what it looks like right now:

Torn apart for painting

And drying out everything. And cleaning up that clusterfvck of wiring you see hanging down on the passenger side.

blackknight · 11-01-2009, 08:12 PM

ur truck's dirty

kirknd4spd · 11-01-2009, 08:13 PM

Quote:

Originally Posted by blackknight

ur truck's dirty

Meh, it's normal. Hasn't really been clean since I drove it off the lot 2 years ago

94383Z71 · 11-01-2009, 09:10 PM

I like it! I'm doing blue in my truck because it matches my 02 gauge, and a tranny switch I have, and the back light on my phone

5.7L JWL · 11-03-2009, 02:25 PM

Looks good Kirk!

Do you think the High's are going to make in your line of work being mounted that low?

Jay

kirknd4spd · 11-03-2009, 05:19 PM

Well, Im hoping they'll be fine there. Only problem is that's about the only flat surface on my door panels with enough room behind it to mount something. The only other good surface is around my window crank, so I'd hit it with my hand every time I opened or closed teh window.

Right now though, my only worry is dropping off in a water hole wheeling and screwing up everything

WetPaintSierra · 11-03-2009, 06:25 PM

How do you like the sony? How much was it?

kirknd4spd · 11-03-2009, 06:27 PM

Quote:

Originally Posted by WetPaintSierra

How do you like the sony? How much was it?

I like it, it's been in my truck since I bought it about 2 years ago.

I'm not sure how much it cost though, it was a gift from my parents since my truck didn't have a HU when I bought it.

01SilvyZ71 · 11-03-2009, 06:35 PM

hint hint- shop vac and a wet rag for the interior..

kirknd4spd · 11-03-2009, 06:39 PM

Quote:

Originally Posted by 01SilvyZ71

hint hint- shop vac and a wet rag for the interior..

No wet rag, I finally got all the water out of teh interior

It'll get a good cleaning before the nice freshly painted black interior pieces go in

Well, they don't really look nice now though, it was too cold when I sprayed them I guess, they didn't turn out right.

01SilvyZ71 · 11-03-2009, 06:46 PM

ohh i gotcha. hell i cant stand havin a dirty interior. screw what the outside looks like. i've vacuumed the inside twice since last sunday. need to do it again soon.

kirknd4spd · 11-04-2009, 04:57 PM

Got all the pieces I had out painted today, sprayed everything with black. Maybe I'll have a chance to do the door panels by this weekend, but the dash is gonna have to wait until next weekend, if I even paint it. I may just strip off the factory paint (that's already peeling) and leave it plain black plastic. I dunno. I'll try to get some pics in a little while. Paint is drying now.