Post Your Setup - Page 11

Knox · 05-18-2009, 07:31 PM

Year - 2001
Make - Chevy
Model - Sivlerado
2wd or 4wd - 4wd
Tire Size -
Wheel Size -
Drop kit size and Brand if not stock - stock
Torsion bar Rating or Code: (If 4wd)
Torsion bars decranked or not and if so how much. (4wd or Awd)
Torsion bar keys if any
Drop Blocks? none
Drop Leafs? none
Aftermarket Bumpers? not yet
Fender Height Measurements
Any fender or body trimming needed? (If so where?)

DroppedAsAChild · 05-18-2009, 07:54 PM

Quote:

Originally Posted by olblue067

Year: 1996
Make: Chevy
Model: C-1500 W/T
2wd
Tire Size: 275/45/20
Wheel Size: 20x8.5

Front
3 inch DJM Drop Coils
2 Inch DJM Drop Spindles

Rear
6" Custom Flip Kit using stock hangers
1" custom drop shackles

pictures are off a camera phone, so its not that good haha

Whats the Backspacing on your wheels?? Do you think ill be fine with a 255/50/20 on a 20x8.5 with a 5.5" bs??

RodZ · 05-22-2009, 02:22 PM

2002 Silverado along with my buddies help. We use a Eibach Pro-Kit Spring Set from Tire Rack.com. It set it down 2.5"F 4.3"R. I'm very happy with the stance. We did take the bead off and dropped the gas tank. I have 265/35/22 KUMHO ECSTA STX tires. The wheels are Boss Motorsports 22x9.5 from custom wheel.com.

Dixie · 05-22-2009, 10:56 PM

Daphne's Truck

Year - 1971
Make - Chevy
Model - Custom Deluxe
2wd or 4wd - 2wd
Tire Size -
Wheel Size -15x10
Drop kit size and Brand if not stock -Cheezed coils
327-3 speed

BADRIDES · 07-26-2009, 10:26 AM

Anyone have a link that shows how to trim fenderlips and LCA's to make chrome 454ss wheels work on a 4/6 Belltech drop for a 96 Silverado?

tahoetweaker · 08-07-2009, 09:24 PM

Year - 1999
Make - Chevy
Model - Tahoe
2wd or 4wd - 2wd
Tire Size - 275/45/20 (roughly 29")
Wheel Size - 20
Drop kit size and Brand if not stock - 2" djm drop spindles, unkown, 1-2" drop shackle and 4" leafs in the back.
Drop Leafs? - Soon to be 4" western chassis
Fender Height Measurements - FL - 31" FR - 31 1/2" Rear is 34"
So i guess I have 3 inches of rake -_-
Any fender or body trimming needed? (If so where?) - Rolled front fenders for my tires, cause they like to pull the fender lip down on big bumps

KADILLACKID · 08-10-2009, 04:58 PM

Quote:

Originally Posted by BADRIDES

Anyone have a link that shows how to trim fenderlips and LCA's to make chrome 454ss wheels work on a 4/6 Belltech drop for a 96 Silverado?

This was my wifes truck we got rid of it not long ago-Rolled front fender lips,trimmed the "rain gutters" from the LCA's(its not much,maybe 1/2" at the very most about 1.5" deep. Its a 4/6 belltech with 235/75 radials

88z71 · 08-24-2009, 11:50 AM

http://

Year 2003
Make chevy
Model silverado
2wd or 4wd: 2wd
Tire Size idk
Wheel Size: 20's gion on 2marrow!

Drop kit size and Brand if not stock belltech shackle
Torsion bar Rating or Code:
Torsion bars decranked or not and if so how much.
Torsion bar keys if any
Drop Blocks?
Drop Leafs?
Aftermarket Bumpers?
ss bumper and roll pan in the paint shop now.

mrchevyboy04 · 09-09-2009, 12:20 AM

Year-2003
Make-chevy
Model-silverado crew cab 2500hd
2wd or 4wd-2wd
Tire Size-35 by 12.5
Wheel Size-20in
Torsion bars. stock (an yes 2wd with torsion bars)
lift- 3in body
motor- 6.0L

in a couple of months im going to put a sold alxe up front / make it 4wd

let me know what you think

DoughBoy808 · 09-22-2009, 04:31 PM

94 cheyenne
extra cab/ long bed
extensive metalworks 2-link
RE-7 bags- front and rear
viair 480 w/ 5 gallon tank
4 1/2" parker valves-front
2 1/2" parker valves-rear
under bed notch
stock a-arms and spindles
20 inch limited wheels
planning to add a full notch and drop spindles next.

brandon_73072 · 09-28-2009, 07:01 PM

2007 Silverado Classic Ext. Cab
belltech 4"/7" drop 2" spindals/ 2" Coils, 6" Flip Kit,Custom 1" Shakles
255/40/20 Yokohama Tires
Eagle Alloy 20's

Before

After

brandon_73072 · 09-29-2009, 04:51 AM

Just painted the rear drums here recently

Got the Front Rotors Painted and Ready To Install, now just need to put them on.

dlydrug · 10-02-2009, 12:45 PM

here is my 92 c1500 ex cab i traded my 5in body dropped s10 on 22s with a 355 sbc for it. right now its bagged on all 4 corners with slam re8s and firestone 2600s. 12 gallon tank, EDC and 2 back up compressors,GC 350 and 450 valves. was on a set of 20s but sold them. now it has stock steelies painted to match with chrome ring and cap. some audio work, and some bolt ons.a few mods to the motor.

plan for rebuild start next month. traditional 5in. body drop, just ordered 22 inch boss 304s in black.steel roll pan,phantom grille,04 silverado ss black paint. fiberglassing dash and part of door panels, all red leather interior.

here are some pics from a month ago when i got it, since then took the tonneu cover off, the stupid chrome gas door, sold the wheels smoked the headlights and taillights. just ordered black 22in boss 304s.

anythingfastxxx · 10-04-2009, 02:00 PM

'95 GMC Cheyenne
2wd ecsb
255/45/20----------------------------275/60/15
20x8.5 + 10mm DIP DO1 Klone------------15x7
Belltech 2" spindles, Belltech 2" shackles for a total of 2/2
Rolled front fender lips for the last set of wheels I had on.

Soon to be 2/4. Just haven't had time to get my hangers on.

STOCK WHEELS w/ 275/60/15s

OLD TRUCK (GOT WRECKED)
'95 w/ 2/4 drop

MonroeOgden · 10-15-2009, 04:30 AM

I still creating.I`ll reply you later.

---------------------------

Please contact me.

Rocco@sycodas.am
Roderick@sycodas.co.ee
Roderigo@sycodas.gr
Rodney@sycodas.hu
Rogan@sycodas.ru

Iowa599 · 10-16-2009, 08:47 PM

Quote:

Originally Posted by low95xlt

That has got to be the strangest custom body work I have ever seen. Well, except those Japanese Bosozoku things.

J_Spec · 10-18-2009, 01:47 AM

1991 Silverado
Belltech 5/7 drop
Phantom grille
Shaved taillights
Corvette rollpan/ taillights
Fiberglass front bumper cover
Bed liner
Rolled fenders
20x9 Status Dynasty wheels (+15 offset)
255/45R20 tires