Post Your Setup

[Matt Helm]

This is my 2/4 drop. I have Sprintech 2" drop spindles and Springtech 2" front leaf brackets and Bell tech 2" rear spring lowering shackles. Its 29 1/4" front ground to fender and 30 3/4 at the rear. It does have alot of rake, I thought it should have been level. It almost looks like a 3" drop on the front. Running 275/60 r 15's at this posting but because of clearance problems I am installing 245's today on the front. Rebuilt 5.0 litre, stock, new trans, last week, fresh paint, LineX, Extang full tilt, 85 Sub 8" rallies, roll pan, flowmasters with Magnaflow tips, Drop kit with Belltech twin tubes all around, Pioneer CD, 8 speakers, 2 10" subs and an additionsl 200 watt amp. Good grocery getter!

[primetime]

1991 Gmc Single Cab,5.7 Liter,msd 6al Box,blaster Coil,throttle Body Spacer,flowmaster Exhust, 2 Pump Show Time Hydraulics,three Dumps,6 Batteries,8in Cylinders All Corners,bellteck Spindels, Cut Three Ton Showtime Springs In Front, Flip Kit, Custom Leafs,hangers,shackles, Cylinders Mounted Over Rearend In Bridge And 8in Notch That I Built At Work. Yes It Lays With Leafs. Shaved Doors,tailgate handel,antena,third Brake Light,stack Pockets,tail Lights,molded Roll Pan. Soon The Gas Door , And Roof Seams. It Rolls On 20in Boyd Blasters With 255/35/20z. NOW STOCK FLOORED . All Back Yard It's A Work In Progress

[ME_TOBSTER]

1992 Chevy of course
C-1500
2wd
17x8 w/235/45/R17 front
17x10 w/275/40/R17 rear(I know catch up)
front and rear fenderwell lips rolled
rear inner fenderwells gone
fronts to be gone very soon
2" Bell Tech spindle
Slam RE-7's
KP -link w/watt's link
TR Manufacturing monster notch
3/8" Easy Street valves
3/8" line
EDC w/square D switch 230psi.
phantom grille w/resess kit
self made front bumper billet from an old phantom grille and frenched plate.
shaved tails, gate handle, stakepockets
Supra tails
Buick hood hinges
2" Good mark steel hood
Checkmate flush bed cover
'89 firebird wing cut down to be shorter
Horn Blasters train horn behind front bumper
20% tint on doors
5% everywhere else
painted handles
blacked out B pillar

[Monzter]

Heres my 94 C1500 "Work Truck". Its bagged with 2" spindles & tubular control arms up front. Out back is a 5 link that I made with a 11" bridge, I originally set it up to run 20s & 24s. I'm running 15X6" Vette Rally wheels with 3.5 " back spacing on 205/65-15 tires up front & 15X8" Vette Rally wheels with 5" back spacing on 255/70-15 tires in the rear. Its a daily driver/shop truck so I'll be running the 15s for a while.

[1badws6]

2005 Sierra
DJM 3/4 drop
22"x9.5" Dvinci Havocs
265/40/22
Shaved badges and moldings

[Mad Chemist]

Originally Posted by 1badws6

2005 Sierra
DJM 3/4 drop
22"x9.5" Dvinci Havocs
265/40/22
Shaved badges and moldings

nice truck 1badws6!!! I've been wanting to see a 3/4 or 3/5 with 265-40-22s. I've been thinking about raising my truck to a 3/5 and changing tires to 265-40-22. I'm really getting sick of the $hitty ride I get with the 265-35-22s. 4/6 with 265-40-22s might be pushing it abit.

[ProHopper]

Hey I am a noob to this site but not to chevys!!

I have an 89 fullsize chevy shortbed single cab,

The Exterior-

Shaved everything- door and tailgate handles, gas door, tail lights, 3rd brake light, stake holes, trim holes, emblems, antenna hole.

Relocated- tailgate handle inside bed "cause whats a truck without a tailgate?"

Relocated- gas door into the bedfloor molding in the original gas door "its cool!"

Bolt-ons- 98 front end conversion, chrome grill, diamond lights, 60" led brake light and turn signal combo in rear, sir michaels rollpan in rear, street scene mirrors but not for long, dented up bumper in front but not for long.

Suspension-Monster notch, Pete & Jakes 2 link, 4 Slam Hs72's, 8 GC Extreme 250 1/2" valves, 2 Viair 450's and 1 5 gallon tank all bolted to custom made mounts underneath the bed, relocated the gas tank with new crossmember wich is all one unit with the removable rack that the compressors and tank mount to for easy in and out for servicing.

Wheels & Tires- it rolls on 22" Alba Flex's wrapped in Nitto 420S rubber

Interior- custom upholstered seat and the rest is clean but undergoing a facelift.

Engine- A cute lil 4.3 vortech v6 great gas mileage.

[MinnesotaFZR]

2003
Chevrolet
Silverado
2wd
265/70/17 (2005 z71 take offs)
Front - 2" McGaughy Spindles (17"+)
Back - 2" McGaughy Hangers and 2" McGaughy Shackles
Doetsch Shocks, Belltech Button Bump Stops, and No Frame Notch

[scrubb]

2002
Chevy
Avalanche
2wd Z66
305/40/22
22X10
pieced together kit... McGaughy 2" drop spindles, DJM 5" drop springs in the rear, belltech nitro active shocks
Torsion bars tweeked down 2.5" (total 4.5" drop in the front)
no trimming needed..I just rubbed the extra pieces off.

[DjLunchbox]

Originally Posted by ProHopper

Hey I am a noob to this site but not to chevys!!

I have an 89 fullsize chevy shortbed single cab,

The Exterior-

Shaved everything- door and tailgate handles, gas door, tail lights, 3rd brake light, stake holes, trim holes, emblems, antenna hole.

Relocated- tailgate handle inside bed "cause whats a truck without a tailgate?"

Relocated- gas door into the bedfloor molding in the original gas door "its cool!"

Bolt-ons- 98 front end conversion, chrome grill, diamond lights, 60" led brake light and turn signal combo in rear, sir michaels rollpan in rear, street scene mirrors but not for long, dented up bumper in front but not for long.

Suspension-Monster notch, Pete & Jakes 2 link, 4 Slam Hs72's, 8 GC Extreme 250 1/2" valves, 2 Viair 450's and 1 5 gallon tank all bolted to custom made mounts underneath the bed, relocated the gas tank with new crossmember wich is all one unit with the removable rack that the compressors and tank mount to for easy in and out for servicing.

Wheels & Tires- it rolls on 22" Alba Flex's wrapped in Nitto 420S rubber

Interior- custom upholstered seat and the rest is clean but undergoing a facelift.

Engine- A cute lil 4.3 vortech v6 great gas mileage.

i did a double take for a quick second

[1badgmc]

Originally Posted by XXL

My other hooptey...

Year 1969
Make Chevy
Model C-10 SWB stepside
2wd or 4wd 2wd
Tire Size 255/50-17
Wheel Size 17x8
Drop kit size and Brand Front: spindles, xmember notch, ART Strongarms, bags
Rear: lots of mods, bags

What color blue is that? Looks familiar.

[donkey show]

Originally Posted by DemoN

Year: 2001
Make: Chevy
Model: Silverado 2 Dr
2wd or 4wd: 2wd
Tire Size: 245/40/20
Wheel Size: 20x8.5
Drop kit size and Brand: 4/6 DJM Calmax II, DJM UCAs, Doesch Tech Shocks
Aftermarket bumbers: Custom Classics Rollpan, 99+ Tahoe Z71 front bumper & Airdam
No trimming required

this truck is one of the best lookin on FSC, IMO. AMAZING! is that a vett motor? how much $ and work went into that?

[Rorkrado]

2000 Chevy Silverado Ext cab.
Motor- 5.3 Vortec v8
Wheels- 20x8 Centerline Tomahawk series-Avenger II's
Tires- 275-45-20 Goodyear eagle
Suspension front- Suicide doors bag brackets, Firestone 2600's
Suspension rear- Extensive metalworks 2-link w/panhard, suicide doors notch, Firestone 2600's
Air management- Suicide doors engine driven compressor kit, 8 1/2" SMC valves, 12 and 7 gallon air tanks linked together.
interior- mostly stock with billet gauge cluster, A pillar gauge pods for my air gauges.
Exterior- debadged, and flamed billet grille, projector headlights.... and lots of wax
Other- Front fenderwells cut out, rear suicide doors tubs and notch cover. LAYS FRAME FROM FRONT TO BACK


ride height

FRAME!

[Midnight 305]

2/4 drop DJM
Bilstein drop shocks
20" Akuza Rewind rims

[TukN22z]

2002 GMC
3/4 Belltech drop
22's
Shaved up
and soon to be layed!

[drpdshrty]

1994 Chevy SWB V6
Belltech 3" springs
Belltech 2" spindles
Belltech 6" flipkit w/notch
Belltech drop shocks all around
Grille shell w/ T-Rex 31 bar billet grille
Shaved tailgate
Custom Classics steel rollpan
Smooth front bumper
M3 mirrors

In the works:
Slam-air helper bags w/tank and compressor
2" shackles
Doestch Tech shocks
Train horns

[XXL]

Originally Posted by 1badgmc

What color blue is that? Looks familiar.

I was going to steal your gas door and match from that, but instead I went with '71 Ford Grabber Blue (code J), and then just a twinge more "umph" to the blue... gave the mixer the lid off a can of Krylon (I believe it's called "Globe Blue")...

[04SilveradoMykk]

Update, edited:4/09/07

2004 Silverado 2wd W/T

265/70-17 tires at all four corners
Lowered 2"/4" by Ground Force. Coils, Hangers & Shackles + new shocks.
needed 4 degree diferential shims to re-align pinion angle after lowering.
Front wheels bottom out on inner fenders on extreme bumps.
Rear axle bottoms out occasionally, notch coming soon.
OE front bumper, black valance from an '07 model year.
front valance skirt from a Z71.

[Silverad04]

a water squirt gun in your tailgate? Where is it and why?

Originally Posted by 04SilveradoMykk

2004 silverado 1500 base model work truck
4.3L / 4L60E
I was lucky to get A/C, CD player and Cruise Control

265/70-17"s

*K & N F.I.P.K.

*Hypertech Power Programmer III; 87 octane, firm shifts, modified shift points (daily driver)

*Airaid Poweraid throttle body spacer

*March Underdrive Pulleys, Power& Amp series

* 3" mandrel bent cat back, flowmaster 50 series, car chemistry 3 disc exhaust insert, stylin'concepts through body exhaust tip

*180 degree thermostat instead of 195

*Ground Force 2"/4" lowering kit.

*Aimco slotted, cross drilled & vented front rotors. painted calipers

*Trenz polished aluminum grill (soon to be Street Scene Speed grill)

*Bully polished aluminum bow tie & fuel door

*Transdapt polished & finned aluminum differential cover

*tinted windows, 5% rear 35%sides

*Snugtop bed cover

*deleted daytime driving lights & parking lights

*aftermarket fog lights where the tow hooks used to be

*shaved tailgate handle

*Summit fiberglass roll pan

*GM 2006 airdam skirt

*RD white guage face

*Street Scene Cal-vu mirrors

*removed amber corners from factory headlight & parking light lenses

*viper alarm with remote start

*water squirt gun in tailgate

*removed spare tire winch, spare in bed.

[04SilveradoMykk]

it's a spare coolant oveflow reservour and a windshield washer pump mounted in the bed. the nozzle is on the inside side of the bed panel in the gap between the tailight lens and the tailgate... Why? for fun, squirt friends on the road, tailgaters, convertables...... my girlfriend likes to get me whenever I walk behind the truck...