Post Your Setup

[Mark]

This thread is being created to help those see what their setup will look like before they purchase it. Please follow my example and post your information as I do mine. Any posts made not resembling mine will be deleted. Please keep any questions to PM regarding a setup. Please include as much information as possible about your setup that could affect the overall height of your truck. Any change is greatly accepted, even if it is just a tire size different and still stock. If you are bagged please include your specifications in detail.
Year
Make
Model
2wd or 4wd
Tire Size
Wheel Size
Drop kit size and Brand if not stock
Torsion bar Rating or Code: (If 4wd)
Torsion bars decranked or not and if so how much. (4wd or Awd)
Torsion bar keys if any
Drop Blocks?
Drop Leafs?
Aftermarket Bumpers?
Fender Height Measurements
Any fender or body trimming needed? (If so where?)
If you see something I missed, please let me know and I will add it.

[OKLAGMCRUISER]

1999
GMC
Sierra
2WD
255/35/20
20x8.5 KMC Vamps
4/6 DJM with:
-4" DJM Control arms (Calmax II KIT)
-DJM Upper Control arms
-Beltech 6" flip kit
-Beltech bolt on notch

Edelbrock IAS Shocks
Sir Michael's rollpan in rear welded in
No trimming required...

[JB]

1985
Chevy
C10
2wd
255/60/17
17x9
3/5 DJM drop
3" front lowering coils
5" rear flip kit
custom classic rollpans front/rear
no trimming required

[Izzy]

1983
GMC
Sierra
2wd
275/60/15
15x8
-----------------------------------------------------------
Air Suspension:

Front- ART Cool Ride
F6873 convoluted bag
3” DJM spindles

Rear- ART Parallel 4 link
F9000 sleeve bags mounted over axle

Air- Air Lift Air Commander
12 gallon Air Lift tank
¼” ART Ride Pro valves
-----------------------------------------------------------
Rear Custom Classic roll pan
Rear tubs/notch cover
Front cut/raised inner fenders

[DemoN]

Year: 2001
Make: Chevy
Model: Silverado 2 Dr
2wd or 4wd: 2wd
Tire Size: 245/40/20
Wheel Size: 20x8.5
Drop kit size and Brand: 4/6 DJM Calmax II, DJM UCAs, Doesch Tech Shocks
Aftermarket bumbers: Custom Classics Rollpan, 99+ Tahoe Z71 front bumper & Airdam
No trimming required

[thecodeman]

1996
Chevrolet
Silverado Extended Cab
2wd
Tire Size: Front - 245/40/20 Rear - 275/35/20
Wheel Size Front - 20x8.5" with 5.5" backspacing Rear - 20x10" with 6.25" backspacing
Drop kit:
Front -
DJM 2" spindles
ART Cool Ride Kit, upper and lower tubular control arms.
Air Ride Technologies cups trimmed 1 1/2"
Slam Specialties RS72 airbags

Rear:
Outlawmotorsports parallel 4link
KP Watts Link
KP Components Cantilever attachment
Slam Specialties RS72 airbags

Air:
Airlift Air Commander
2 7 gallon FBImini.com airtanks
8 SMC 3/8" valves
1/2" line

Aftermarket Bumpers? 2002 GMC 2500HD Diesel Bumper, Rear Custom Classic Rollpan

Fender Height Measurements? n/a yet

Any fender or body trimming needed? (If so where?)
Cut bed for notches, rear axle pumpkin, wheeltubs/notch cover installed (suicidedoors.com).
Cut out inner fenders/support of actual fenders. Trailer fenders welded in.

Frame Modifications:
8" Suicide Doors weld in notch
1.5" notch for tie rod clearance
Raised gas tank 1.5"
Notched crossmember for driveshaft

[Mark]

2002
Chevrolet
Tahoe
2wd
275/45 R20 Goodyear GTII
20x9 American Racing Nooz
2002 2500HD Torsion Bar Purple Keys ( 3"s )
Torsion bars cranked 1"
Rear DJM 5" Drop Coil
McGaughy's Air Helper for 1" lift
Fender Height Measurements n/a

[chwelch]

2002
Chevy
Silverado
2wd
255/35r20
20" x 8.5"
Air Bag Suspension: 2600 Bags Up Front w/ KP Cups
www.BaggedandDragged.com Parallel 4 Link out back with 2600 Bags
10" Monster Notch, GC Xtreme 450 Valves, 2 Viar 450 Compressors, 2- 5 Gallon Tanks
Aftermarket Goodmark Chrome Lower Valance
Fender Height front: 24.5" Rear: 24.75"
Timmed out inner fenders, Cut out Inside of Bed, Custom Tranny Crossmember, Relocated Fuse Box, Relocated Radiator Overflow

[Forrest]

1994
Chevrolet
C1500 "Silverado" Extended Cab
2wd
Tire Size: 255/35/20
Wheel Size Front - 20x8.5" with 5.25" backspacing

Drop kit:
Front -
DJM 2" spindles
Suicide Doors cups
Contitech 2 ply 2600's

Rear:
KP 6 Link kit.
KP Components Cantilever attachment (included in kit)
Contitech 2 ply 2600's

Air:
Airlift Air Commander Engine DRiven compressor kit
2 airlift 5 gallon tanks
8 SMC 3/8" valves
1/2" line


Any fender or body trimming needed? (If so where?)
Cut bed for notches, rear axle pumpkin, wheeltubs/notch cover installed.
Cut out inner fenders/support of actual fenders.

Frame Modifications:
8" Suicide Doors weld in notch
1.5" notch for tie rod clearance
Raised gas tank 1.5"
Notched crossmember for driveshaft

[tahoen]

Year-1997
Make-chevy
Model-Tahoe
4wd
Tire Size-265/50/20
Wheel Size-20"
Beltech Drop kit- 3/3-1/2
Torsion bar Rating or Code: (If 4wd) (not sure what this means)
Torsion bars decranked or not and if so how much. (4wd or Awd) (not sure what this means)
Used Torsion bar keys To lower the front
Drop Blocks?N/A
Drop Leafs to lower the back.
Aftermarket Bumpers-Smoothie Front Bumper w/Frenched License Plate Box/ Back-Sir Michael's rollpan in rear
Fender Height MeasurementsN/A
Any fender or body trimming needed? (If so where?) Nope

2002
gmc
sierra
5.3ltr 2wd
265/40/22-toyo proxes
AIr ride suspension
Kit from coolcars.org/gaugemagazine.com(front and back for now)
FRONT:
firestones 2-2600's
monroe shocks with innovative's relocators
lower brackets from innovative(thanks larry)

REAR:
10 inch notch(2 big IMO even for 22's)
tri 4link ART
2-firestone 2500's
shocks
AIR SYSTEM:
2 viarr 450's
2 tanks: one 5 gallon one 3 gallon connected together to make total of 8 gallons
parker valves.
All 1/2 line
viarr pressure switch
front sits on the fenderwells(about 3 inches from frame)
Rear sits about 2-3 inches lower than stock due to AOL in the rear

[93wt]

93 wt longbed

5/7 drop

front- spindles and springs from belltech
stock rims, 215/70/15 I believe
notched lca's to use stock rims
with the stock 235/75's they would sometimes dig fender lip on bumps...that's why i went skinnier and smaller

rear- flip kit, bolt in c-notch from belltech
stock rims, 225/75/15 I believe
had to notch crossmember at front of bed because driveshaft was hitting

[Zodiac]

2000
Chevrolet
Suburban 1500
4WD
265/70-16 (stock)
16 (stock)
2/3 by Ground Force
Stock
Not decranked, new keys
Ground Force Keys
No blocks, no leafs, 3" drop rear coils
34.5" front, 35.75" rear
No trimming

[454ss]

92
Chevy
454ss
2wd
255x35-20
20x8.5
Belltech 5-7
2"spindles
3" coils
6"flip kit
C notch
2"shackles, bottom hole used for 1" drop
Doetsch Tech Shocks
Rear shock extenders
shorter bumpstops front and rear.
Notch out bed support over pumkin.
rolled front fender lips.
custom classic rollpan.

[454ss]

90
Chevy
454ss
2wd
255x50-17
17x8 front
17x9.5 rear
Belltech 4-6
2" spindles
2" coils
6" flip kit
C notch
short front and rear bump stops
rear shock extenders
Bilsteins shocks
Notched out bed support over rearend
rolled front fender lips.
Custom classic rollpan

[shlamdchevy]

00
chevy
silverado
2wd
255/55/16
tahoe wheels 16s
airride in front slam rs72s w/gc 450 valves. and a 6 inch flip in the rear by djm with a c-notch
ss bumper cover
sirmichaels roll pan

[chevy6998]

1989
Chevy longbed 3/4 ton 6 lug
w/t
2wd
305 v-8, 700r4
265/35/zr22 perellis
22x9.5 Driv Toetags http://www.mhtwheels.com/wheel.cfm?brand=7&cat=68

Rs72 bags
gc 250 valves
1/2" line
10 switch box
Djm 2" drop spindles
Stock upper lca (lower is stock but modded)
custom 4-bar/canti (only 4 bars, no 6th links) super pivot bars ends www.suicidedoors.com
www.jpkustoms.com
custom watts link
10" notch
(2) viair 450's w/ 145 psi switch
(2) 5gal tanks
9 cu Nitro Bottle
Re-routed exaust behind/under tailshaft, flowmaster 40 with turndown at axle

Led tails www.precisionrodware.com

smoothie front bumper (ebay)
Roll pan (ebay)
Grill and billets (carlisle swap meet)
diamond clears www.mrtaillight.com
Checker fx tonneau www.checkerpro.com

Notched Firewall for front tires, raised wiring harness at fire wall, all fender lips are trimmed down to 1/4", Custom rear tub and all inner fenders are trailer style 32" diam. Raised tank x-members and notched for driveshaft, and custom x-members for tanks, comps, vavles, all in spare tire location.

[Outlawcrewcab]

1994 chevy crew cab dually
2wd
463 with auto
19" brentz wheels
245-45-19 dunlops

ES82 slams in the front
www.baggedanddragged.com cups
modified Air Bar to lay
8" notch in rear
ES72 slams in rear
york motor drive comp.
2 8 gal tanks
baganddrag.com valves

Caddie tails
Lambo green

[steinfire]

1998
Chevy
Silverado
2wd
275/45/20
20" X 8.5 KMC Thunder
Belltech 2" shackle for rear.......level stance
Reflexxion Chrome Smoothie bumper w/ lights and inserts
Fender Height Measurements ???

[sylvest]

2000
Chevy
Silverado
2wd
225/60/16 front 275/40/20 rear (in pics, run 225/60/16 all around will be 255/35/20 all around)
16x7/ 20x9

Bags/7 drop
Front:
DJM LCA's, stock upper arms, KP Cups, SLAM RS-72 bags

Rear: DJM Flipkit and Shackle

Air: Herion Fills, Black Max Dumps, 2 Viair 380's, 2 5 gallons

Custom Classic Rollpan
Cut rear fender lips to tuck tires and cut rollpan lip to clear air tanks