LS1/Electric Fan Install Tech Article

[azcatfan]

Thought I'd throw some pics in here. I helped my buddy next door do a set on his TBSS. It went very smooth and looks prefessional....




The stock fan really didn't look like it covered the radiator as well as the new e-fans were going to. Part of the stock fan stuck up above the radiator, and the rest of the surface area of the radiator was covered by the hood.






We used a simple 'C' clamp to break the clutch fan loose...

[azcatfan]

Lots of room with that clutch fan out...



Test fitting...







All Done Up...

[WhiteBrow24]

looks good, i gotta do that to mine.

[RichDash]

ill add for anyone who does this, I did this in the rain and wind at night yesterday, including looming everything and doing it all correct to look factory including using some factory mount locations it took me about 3 hours. Its easy and awesome. Boy does it ever create room in there too!!!

The write up is awesome but one note for anyone who does it, The fan nut size is 1 1/2" not 1 7/8"

[chevyman98]

subscribed